Summary The primary purpose of this position is: to serve as an Air Reserve Technician (ART), technical authority responsible for coordinating the work of other journey-level workers to perform/advise scheduled or unscheduled inspections, repairs, replacements, troubleshoot, documentation, build-up and tear down, flightline maintenance and operational runs of aircraft propulsion systems installed or uninstalled. Responsibilities Duties: -Serves as technical authority to perform/coordinate/oversee troubleshooting and analysis of gas turbine engines to determine air worthiness of propulsion systems installed on aircraft on the flight-line and uninstalled in back shop and test cell capacities. Coordinates, oversees and performs the disassembly, repair, overhaul, inspection and reassembly of aircraft propulsion systems, sub-assemblies, and components. -Skilled/certified in the operation and maintenance of diagnostic test equipment, on-board electronic equipment, a variety of special equipment, hand, measurement and power tools. -Enforces and complies with safety practices and procedures following established safety rules and regulations and maintains a safe and clean work area. Certify, utilize and enforce the work produced under the USAF Technical Order Program and applicable commercial aircraft/propulsion manuals. -Maintain, inspect, operate and certify test cell and hush house. Removes or installs entire propulsion systems from/on aircraft, test cell and maintenance stand working as a member or leader of a team. Maintain, inspect, operate and certify test cell and hush house. -Perform Engine Health Management (EHM) program duties and properly document propulsion system maintenance in historical records and the Maintenance Information System (MIS). Prepares effective training plans to maximize training for assigned personnel. Requirements Conditions of Employment Qualifications In order to qualify, you must meet the quality level of experience requirements described in the Office of Personnel Management (OPM) Qualification Standards Handbook X-118C. QUALIFICATIONS: Applicants will be rated in accordance with the OPM Qualification Standard Handbook X-118C for the WG-8800 Aircraft Overhaul Family. Although a specific length of time and experience is not required for most blue-collar positions, you must meet any screen-out element listed, and show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on the quality of experience, not necessarily the length of time. The screen out element for this position is the ability to perform the work of an AIRCRAFT ENGINE MECHANIC with little to no supervision. KNOWLEDGE, SKILLS AND ABILITIES (KSAs): Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas: 1. Knowledge of the installation, operation, and repair of gas turbine or reciprocating aircraft engines and accessory systems. 2. Knowledge of engine repair practices to identify and correctly choose between alternative methods and trade techniques, adapt accepted repair procedures to new or unfamiliar engines or accessory systems, to anticipate required tools and parts, and to set up the work area. 3. Knowledge of safety regulations, practices, and procedures. Knowledge of documentation procedures. 4. Skill in the use of measuring instruments such as vibration analyzers, pyrometers, engine analyzers, engine diagnostic computer systems, data transfer sets, and test benches. Ability to repair and rework engine parts and components and replace accessories such as portions of electrical, pneumatic, and hydraulic systems. 5. Knowledge in the interpretation, certification and use of technical orders, manufacturers' manuals, engine records, maintenance bulletins, and other technical information. 6. Ability to troubleshoot engine malfunctions, interpret trouble reports or observed instrument readings, appearances, etc., make a tentative diagnosis; select needed tools and test equipment; and disassemble the engine or accessory system to locate the defect. FUNCTIONAL REQUIREMENTS: The work requires moderate to strenuous effort. Must stand, stoop, bend, and reach for extended periods of time. Frequently handles items weighing up to 20 pounds, and often lift and carry assemblies weighing up to 50 pounds. Hoists, hand trucks, lifts, and other employees are available to assist when handling heavy or awkward items. May be required to climb steps and ladders and stand on slippery or inclined surfaces. ENVIRONMENTAL FACTORS: Work is performed in hanger areas, outdoors, in parked aircraft, and sometimes in hazardous noise areas. Exposed to extremes in heat, cold, humidity and inclement weather. Must work in confined areas and in awkward positions. Exposed to dirt, grease, and aircraft fluids, oil, hydraulic fluid, solvents, and hazardous fluids and gases such as Hydrazine and Halon. Subject to cuts, bruises, muscle strain, and injury from falls off scaffolds, ladders, and aircraft surfaces. Slippery or uneven walking surfaces. Working around machinery with moving parts. Working around moving objects or vehicles. May be exposed to intake suction and hot exhaust blast. Working closely with others. Working alone. PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week. VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment.You will receive credit for all qualifying experience, including volunteer experience. This is an Air Reserve Technician (ART) position. ARTs are eligible for 15 days active duty tour each year for which military leave is granted with full civilian pay. Air Reserve units and members; are subject to immediate call to active duty in mobilization to meet a national emergency. For additional information regarding ART positions and/or military qualifications, please call 1-800-257-1212. Retired military are usually ineligible for membership in the AF Reserve. Retired military that have active AF Reserve assignments may apply provided they show assignment (position) on the application. A military service member's statement of service/certification will be accepted IF a terminal leave form or DD214 cannot be provided. The statement/certification should indicate member's separation from active duty is within 120 days of the closing date of this announcement. It must be signed by, or by direction of, the adjutant, personnel officer, or commander of your unit or higher headquarters and must indicate when your terminal leave will begin, your rank, dates of active duty service, the type of discharge and character of service (i.e. honorable). Your preference and/or appointment eligibility will be verified prior to appointment. Military members may be appointed before the effective date of their military retirement/separation if member is on terminal leave. Individuals selected for ART positions must meet both civilian qualifications and uniformed military requirements. In addition to meeting civilian qualifications, applicants must obtain military membership in the Air Force Reserve, wear the uniform, maintain job-specific military specialty requirements, and meet other military qualifications such as age, height, weight, and physical fitness standards. For more information click here and speak with an Air Force Reserve Recruiter. Education Additional Information