Avionic Assembler B
Lockheed Martin
Job ID: 683426BR Date posted: Jan. 15, 2025
Description:Perform a variety of simple operations to build up, assemble, wire, and solder electrical and electronic panel assemblies, printed wiring boards, and harnesses.
Typical Responsibilities
Guided by wiring diagrams, operation sheets and/or assembly work books, perform various operations necessary to properly construct electrical and electronic panel assemblies, printed wiring boards, and harnesses at a bench or on an "A" frame where product must meet military standards such as 2000A and high reliability specifications.
Work with associated automatic and manual tools to fasten terminals, connectors, splices, solder, sleeves, and contacts onto wires at various termination points.
Use a soldering iron to properly solder pins and wires onto connectors, relays, etc.
Use various types of hand tools to assemble, route, tie, and/or install components on harnesses, black boxes, subassemblies, and other related assemblies.
Apply protective coating (poly, RTV, etc.) and brightboy and apply alodine, touch-up paint, and loctite.
Torqueing may be required on some assemblies.
Complete assemblies by terminating wires to plugs, ground lugs, switches, circuit breakers, blocks, boards, etc.
As applicable secure assembly in container using proper nut, bolt, spacer, etc.
Correct discrepancies; replace broken, miscoded or otherwise defective wires, connectors, components, etc.
Perform simple repairs/rework on printed circuit boards, units returned for modification; incorporate changes, rewire or replace components as specified.
When necessary make simple repairs and/or changes to avionic assemblies already incorporated into major assemblies or installed in aircraft.
Maintain documentation of operations performed.
Refer any unusual work problems to higher graded worker, working leader, or supervisor.
Segregate waste material and follow good housekeeping practices.
Perform other duties, usually of a related or similar nature, at the direction of supervision.
#OneLMHotJobs
Basic Qualifications:
High school degree or equivalent
0-1 year experience
Ability to read blue prints and follow work instructions.
Desired Skills:
Familiarity with manufacturing environment and tooling. Familiarity with electronic theory and manufacturing.
Clearance Level: None
Other Important Information You Should Know
Expression of Interest: By applying to this job, you are expressing interest in this position and could be considered for other career opportunities where similar skills and requirements have been identified as a match. Should this match be identified you may be contacted for this and future openings.
Ability to Work Remotely: Onsite Full-time: The work associated with this position will be performed onsite at a designated Lockheed Martin facility.
Work Schedules: Lockheed Martin supports a variety of alternate work schedules that provide additional flexibility to our employees. Schedules range from standard 40 hours over a five day work week while others may be condensed. These condensed schedules provide employees with additional time away from the office and are in addition to our Paid Time off benefits.
Schedule for this Position: Standard Monday to Friday 40 hour work week
Lockheed Martin is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.
The application window will close in 90 days; applicants are encouraged to apply within 5 - 30 days of the requisition posting date in order to receive optimal consideration.
At Lockheed Martin, we use our passion for purposeful innovation to help keep people safe and solve the world's most complex challenges. Our people are some of the greatest minds in the industry and truly make Lockheed Martin a great place to work.
With our employees as our priority, we provide diverse career opportunities designed to propel, develop, and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. We place an emphasis on empowering our employees by fostering an inclusive environment built upon integrity and corporate responsibility.
If this sounds like a culture you connect with, you’re invited to apply for this role. Or, if you are unsure whether your experience aligns with the requirements of this position, we encourage you to search on Lockheed Martin Jobs, and apply for roles that align with your qualifications.
Experience Level: Hourly/Non-Exempt
Business Unit: RMS
Relocation Available: No
Career Area: Manufacturing
Type: Full-Time
Shift: Second
Description:Perform a variety of simple operations to build up, assemble, wire, and solder electrical and electronic panel assemblies, printed wiring boards, and harnesses.
Typical Responsibilities
Guided by wiring diagrams, operation sheets and/or assembly work books, perform various operations necessary to properly construct electrical and electronic panel assemblies, printed wiring boards, and harnesses at a bench or on an "A" frame where product must meet military standards such as 2000A and high reliability specifications.
Work with associated automatic and manual tools to fasten terminals, connectors, splices, solder, sleeves, and contacts onto wires at various termination points.
Use a soldering iron to properly solder pins and wires onto connectors, relays, etc.
Use various types of hand tools to assemble, route, tie, and/or install components on harnesses, black boxes, subassemblies, and other related assemblies.
Apply protective coating (poly, RTV, etc.) and brightboy and apply alodine, touch-up paint, and loctite.
Torqueing may be required on some assemblies.
Complete assemblies by terminating wires to plugs, ground lugs, switches, circuit breakers, blocks, boards, etc.
As applicable secure assembly in container using proper nut, bolt, spacer, etc.
Correct discrepancies; replace broken, miscoded or otherwise defective wires, connectors, components, etc.
Perform simple repairs/rework on printed circuit boards, units returned for modification; incorporate changes, rewire or replace components as specified.
When necessary make simple repairs and/or changes to avionic assemblies already incorporated into major assemblies or installed in aircraft.
Maintain documentation of operations performed.
Refer any unusual work problems to higher graded worker, working leader, or supervisor.
Segregate waste material and follow good housekeeping practices.
Perform other duties, usually of a related or similar nature, at the direction of supervision.
#OneLMHotJobs
Basic Qualifications:
High school degree or equivalent
0-1 year experience
Ability to read blue prints and follow work instructions.
Desired Skills:
Familiarity with manufacturing environment and tooling. Familiarity with electronic theory and manufacturing.
Clearance Level: None
Other Important Information You Should Know
Expression of Interest: By applying to this job, you are expressing interest in this position and could be considered for other career opportunities where similar skills and requirements have been identified as a match. Should this match be identified you may be contacted for this and future openings.
Ability to Work Remotely: Onsite Full-time: The work associated with this position will be performed onsite at a designated Lockheed Martin facility.
Work Schedules: Lockheed Martin supports a variety of alternate work schedules that provide additional flexibility to our employees. Schedules range from standard 40 hours over a five day work week while others may be condensed. These condensed schedules provide employees with additional time away from the office and are in addition to our Paid Time off benefits.
Schedule for this Position: Standard Monday to Friday 40 hour work week
Lockheed Martin is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.
The application window will close in 90 days; applicants are encouraged to apply within 5 - 30 days of the requisition posting date in order to receive optimal consideration.
At Lockheed Martin, we use our passion for purposeful innovation to help keep people safe and solve the world's most complex challenges. Our people are some of the greatest minds in the industry and truly make Lockheed Martin a great place to work.
With our employees as our priority, we provide diverse career opportunities designed to propel, develop, and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. We place an emphasis on empowering our employees by fostering an inclusive environment built upon integrity and corporate responsibility.
If this sounds like a culture you connect with, you’re invited to apply for this role. Or, if you are unsure whether your experience aligns with the requirements of this position, we encourage you to search on Lockheed Martin Jobs, and apply for roles that align with your qualifications.
Experience Level: Hourly/Non-Exempt
Business Unit: RMS
Relocation Available: No
Career Area: Manufacturing
Type: Full-Time
Shift: Second
Confirm your E-mail: Send Email
All Jobs from Lockheed Martin