Summary About the Position: You will function as a Civil Engineer (Structural) with the Army Corps of Engineers, Nashville District, Engineering and Construction Division. Responsibilities Perform a wide variety of structural engineering features pertinent to the new construction and/or modification of navigation locks and dams, flood control and local protection projects and appurtenant features. Apply loads to structural members and performs stability and flotation analysis to obtain resultant stresses such as shear, tension, compression or torsion on the structure. Prepare sketches showing dimensions, steel sizes and spacing, and notes required to prepare contract drawings pertaining to structural design. Prepare or coordinate preparation of finished Computer Aided Drafting and Design (CADD) drawings on structural items for use in contract drawings. Make comparative cost estimates as an aid in choosing between two or more alternative designs. Coordinate the engineering data resulting from preceding work and provides technical assistance in the preparation of preliminary designs and estimates. Review incoming correspondence, regulations, and directives to keep abreast of new policies and procedures. Requirements Conditions of Employment Qualifications Who May Apply: Only applicants who meet one of the employment authority categories below are eligible to apply for this job. You will be asked to identify which category or categories you meet, and to provide documents which prove you meet the category or categories you selected. See Proof of Eligibility for an extensive list of document requirements for all employment authorities. Current Civilian Employees of the Organization Current Department of Army Civilian Employees Current Department of Defense (DOD) Civilian Employee (non-Army) Domestic Defense Industrial Base/Major Range and Test Facilities Base Civilian Personnel Workforce Interagency Career Transition Assistance Plan Land Management Workforce Flexibility Act Military Spouses, under Executive Order (E.O.) 13473 Non-Department of Defense (DoD) Transfer Priority Placement Program, DoD Military Reserve (MR) and National Guard (NG) Technician Eligible Priority Placement Program, DoD Military Spouse Preference (MSP) Eligible Priority Placement Program, DoD MR and NG Preference Eligible Tech Receiving Disability Retirement Priority Placement Program, DoD Retained Grade Preference Eligible Veterans Employment Opportunity Act (VEOA) of 1998 In order to qualify, you must meet the education and experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document. All grades must meet the basic education requirement listed under Education. In addition to this basic education requirement, for the GS-7, GS-9, and GS-11 levels you must also meet the following: Specialized Experience for the GS-07: One year of specialized experience which includes performing engineering work such as: searching technical reports to obtain information relating to projects; and applying basic formulas to routine calculations. This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-05) OR Education: Successfully completed or will complete within (3) months one full academic year of graduate level education in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as Civil Engineering (Structural). (Note: You must attach a copy of your transcripts.) OR Superior Academic Achievement. In order to be creditable under this provision, Superior Academic Achievement must have been gained in a curriculum that is qualifying for the position to be filled, such as that identified in education above. Superior Academic Achievement is based on: (1) Class Standing - Applicants must be in the upper third of the graduating class in the college, university, or major subdivision, such as the College of Liberal Arts or the School of Business Administration, based on completed courses; OR (2) Grade-Point Average (G.P.A.) - Applicants must have a grade-point average of either (a) 3.0 or higher out of a possible 4.0 ("B" or better) as recorded on your official transcript, or as computed based on 4 years of education, or as computed based on courses completed during the final 2 years of the curriculum; or (b) 3.5 or higher out of a possible 4.0 ("B+" or better) based on the average of the required courses completed in the major field or the required courses in the major field completed during the final 2 years of the curriculum.; OR (3) Honor Society Membership - Applicants may be considered eligible based on membership in one of the approved national scholastic honor societies listed by the Association of College Honor Societies (https://www.achsnatl.org/). OR Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) by 18. Add the two percentages. (You must attach a copy of your transcripts.) Specialized Experience for the GS-09: One year of specialized experience which includes preparing portions of conventional engineering plans, designs, and/or design specifications; and conducting limited site surveys. This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-07). OR Education: Master's or equivalent graduate degree or 2 full years of progressively higher level graduate education leading to such a degree in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as electrical engineering. (You must attach a copy of your transcripts.) OR Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the first year (total graduate semester hours minus 18) by 18. Add the two percentages. Specialized Experience for the GS-11: One year of specialized experience which include providing developing structural designs; preparing design engineering documents such as drawings, calculations and narratives; performing site evaluations and investigations; utilizing Computer Aided Drafting and Design (CADD) drawings on structural items for use in contract drawings; developing design computations for structural development features. This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-09). OR Education: Ph.D. or equivalent doctoral degree or 3 full years of progressively higher level graduate education leading to such a degree in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as structural engineering. (You must attach a copy of your transcripts.) OR Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the second year (total graduate semester hours minus 36) by 18. Add the two percentages. You will be evaluated on the basis of your level of competency in the following areas: Building and Construction Structural Engineering Technical Competence Written Communication To be referred, applicants must meet applicable time-in-grade and specialized experience requirements within 30 calendar days after the closing date of the announcement. (Continued in Education) Education Time in Grade: Time in Grade Requirement: Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent (GS-9). Time in Grade Requirement: Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent (GS-7). Time in Grade Requirement: Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent (GS-5) Basic Requirement for all Civil Engineer (Structural) positions and for basic qualifications at the GS-7, GS-9 and GS-11 level: Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must:(1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR A combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico. 3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program. 4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (You must attach a copy of your transcripts.) FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://sites.ed.gov/international/recognition-of-foreign-qualifications/. Additional Information Male applicants born after December 31, 1959, must complete a Pre-Employment Certification Statement for Selective Service Registration. You will be required to provide proof of U.S. Citizenship. One year trial/probationary period may be required. Direct deposit of pay is required. Selection is subject to restrictions resulting from Department of Defense referral system for displaced employees. If you have retired from federal service and you are interested in employment as a reemployed annuitant, see the information in the Reemployed Annuitant information sheet. This is a(n) 18 Engineers and Scientists Career Field position. Multiple positions may be filled from this announcement. Salary includes applicable locality pay or Local Market Supplement. Payment of Permanent Change of Station (PCS) costs is not authorized, based on a determination that a PCS move is not in the Government interest. Relocation/Recruitment incentive may be authorized for a highly qualified candidate and an agency determination that payment is in the Government Interest. If incentives are authorized a service agreement is required.