Job details The CNC Machinist is responsible for manufacturing quality products through the operation of CNC Machinery. This position monitors the machine operation to ensure optimal productivity and maintains the machine in proper working order. This position will comply with the organization's policies, internal controls and Code of Conduct. The CNC Machinist reports directly to the Supervisor, Product Delivery. ...
Schedule: Monday-Thursday 6am-2:30pm, possible until 4:00pm

Rate of Pay: $19-23/hr DOE

Responsibilities:
Key Responsibilities
-Setup CNC equipment without supervision, change cutting tools and adjust machine feeds and speeds as needed.
-Resolve problems by making decisions to correct constraints.
-Equipment set up for CNC Machines
-Identify root causes and corrective action for quality problems.
-Utilize measuring equipment used in the industry such as calipers, micrometers, height gauge and other measuring equipment needed to complete work.
-Use prescribed procedures to inspect part(s) and product(s) produced to assure compliance to specifications that will eliminate defects, scrap, rework, etc. Ensure part(s) meet all Quality requirements.
-Maintain equipment and work area on a daily basis in a clean and orderly condition, report defective equipment, materials and/or faulty operations to supervisor.
-Identify and implement opportunities for process improvement and increased efficiency.
-Perform other duties as assigned.

Accountabilities:
-Accomplishes department and organization goals by accepting ownership for new and incoming orders; exploring opportunities to add value to job accomplishments.
-Hands on production or part movement, as well as time spent training an individual or group on current processes within the group.
-Ensure that work is being produced within the time allotted for the process, with no non-conformances as well as meeting schedule requirements
-Ensure the general maintenance of all equipment within the division is completed and documented daily

Working hours: 6:00 AM - 2:30 AM

Skills:
Machines they run:
HAAS SL30 & 40 Lathes
Mazak Quick Turn Nexus 400-II Lathes
Mazak Quick Turn Smart 350 Lathe
HAAS VF3 Mills
Mazak Nexus 510C-II Mills

Education:
High School

Experience:
1-4 years

Qualifications:
Education & Experience:
-1-3 years experience with programming CNC equipment; specifically, Mazatrol and G Code
-Vocational training or equivalent preferred
-Ability to read and interpret blueprints
-Ability to lift up to 50 lbs.
-Work comfortably in a team environment
-Detail oriented
-Good verbal and written communication skills
-Must be able to stand for long periods of time


Apply at www.spherion.com

Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion.

Equal Opportunity Employer: Race, Color, Religion, Sex, Sexual Orientation, Gender Identity, National Origin, Age, Genetic Information, Disability, Protected Veteran Status, or any other legally protected group status.

At Spherion, we welcome people of all abilities and want to ensure that our hiring and interview process meets the needs of all applicants. If you require a reasonable accommodation to make your application or interview experience a great one, please contact Callcenter@spherion.com.

Pay offered to a successful candidate will be based on several factors including the candidate's education, work experience, work location, specific job duties, certifications, etc. In addition, Spherion offers a comprehensive benefits package, including health, and an incentive and recognition program (all benefits are based on eligibility).

Show lessShow more The CNC Machinist is responsible for manufacturing quality products through the operation of CNC Machinery. This position monitors the machine operation to ensure optimal productivity and maintains the machine in proper working order. This position will comply with the organization's policies, internal controls and Code of Conduct. The CNC Machinist reports directly to the Supervisor, Product Delivery.

Schedule: Monday-Thursday 6am-2:30pm, possible until 4:00pm

Rate of Pay: $19-23/hr DOE

Responsibilities:
Key Responsibilities
-Setup CNC equipment without supervision, change cutting tools and adjust machine feeds and speeds as needed.
-Resolve problems by making decisions to correct constraints.
-Equipment set up for CNC Machines
-Identify root causes and corrective action for quality problems.
-Utilize measuring equipment used in the industry such as calipers, micrometers, height gauge and other measuring equipment needed to complete work.
-Use prescribed procedures to inspect part(s) and product(s) produced to assure compliance to specifications that will eliminate defects, scrap, rework, etc. Ensure part(s) meet all Quality requirements. ... -Maintain equipment and work area on a daily basis in a clean and orderly condition, report defective equipment, materials and/or faulty operations to supervisor.
-Identify and implement opportunities for process improvement and increased efficiency.
-Perform other duties as assigned.

Accountabilities:
-Accomplishes department and organization goals by accepting ownership for new and incoming orders; exploring opportunities to add value to job accomplishments.
-Hands on production or part movement, as well as time spent training an individual or group on current processes within the group.
-Ensure that work is being produced within the time allotted for the process, with no non-conformances as well as meeting schedule requirements
-Ensure the general maintenance of all equipment within the division is completed and documented daily

Working hours: 6:00 AM - 2:30 AM

Skills:
Machines they run:
HAAS SL30 & 40 Lathes
Mazak Quick Turn Nexus 400-II Lathes
Mazak Quick Turn Smart 350 Lathe
HAAS VF3 Mills
Mazak Nexus 510C-II Mills

Education:
High School

Experience:
1-4 years

Qualifications:
Education & Experience:
-1-3 years experience with programming CNC equipment; specifically, Mazatrol and G Code
-Vocational training or equivalent preferred
-Ability to read and interpret blueprints
-Ability to lift up to 50 lbs.
-Work comfortably in a team environment
-Detail oriented
-Good verbal and written communication skills
-Must be able to stand for long periods of time


Apply at www.spherion.com

Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion.

Equal Opportunity Employer: Race, Color, Religion, Sex, Sexual Orientation, Gender Identity, National Origin, Age, Genetic Information, Disability, Protected Veteran Status, or any other legally protected group status.

At Spherion, we welcome people of all abilities and want to ensure that our hiring and interview process meets the needs of all applicants. If you require a reasonable accommodation to make your application or interview experience a great one, please contact Callcenter@spherion.com.

Pay offered to a successful candidate will be based on several factors including the candidate's education, work experience, work location, specific job duties, certifications, etc. In addition, Spherion offers a comprehensive benefits package, including health, and an incentive and recognition program (all benefits are based on eligibility).

Show lessShow morekey responsibilities

Key Responsibilities-Setup CNC equipment without supervision, change cutting tools and adjust machine feeds and speeds as needed.-Resolve problems by making decisions to correct constraints.-Equipment set up for CNC Machines -Identify root causes and corrective action for quality problems.-Utilize measuring equipment used in the industry such as calipers, micrometers, height gauge and other measuring equipment needed to complete work.-Use prescribed procedures to inspect part(s) and product(s) produced to assure compliance to specifications that will eliminate defects, scrap, rework, etc. Ensure part(s) meet all Quality requirements.-Maintain equipment and work area on a daily basis in a clean and orderly condition, report defective equipment, materials and/or faulty operations to supervisor.-Identify and implement opportunities for process improvement and increased efficiency.-Perform other duties as assigned.Accountabilities:-Accomplishes department and organization goals by accepting ownership for new and incoming orders; exploring opportunities to add value to job accomplishments.-Hands on production or part movement, as well as time spent training an individual or group on current processes within the group.-Ensure that work is being produced within the time allotted for the process, with no non-conformances as well as meeting schedule requirements-Ensure the general maintenance of all equipment within the division is completed and documented daily

experience

1-4 years

skills

Machines they run:HAAS SL30 & 40 LathesMazak Quick Turn Nexus 400-II LathesMazak Quick Turn Smart 350 LatheHAAS VF3 MillsMazak Nexus 510C-II Mills

qualifications

Education & Experience:-1-3 years experience with programming CNC equipment; specifically, Mazatrol and G Code-Vocational training or equivalent preferred-Ability to read and interpret blueprints-Ability to lift up to 50 lbs.-Work comfortably in a team environment-Detail oriented-Good verbal and written communication skills-Must be able to stand for long periods of time

education

High School

share this job.