Dickerson Generation Station, located in Dickerson, Maryland, is a power generation facility with a total capacity of approximately 294 MW. The station consists of two gas/oil-fired units with GE 7F gas turbines in simple cycle. It operates as a crucial asset for meeting peak demand and ensuring grid stability in the region.

Opportunity Summary

The Combustion Turbine (CT) Technician is responsible for assisting in the operation of power plant systems. This position entails active participation in start-up, shutdown, and routine operations of various plant systems, including critical auxiliary apparatus such as air compressors, circulating water systems, and generator cooling systems. Performing tests, inspections, and minor equipment repairs to maintain optimal operating conditions is a fundamental aspect of this role. The CT Technician collaborates closely with plant personnel, and management to ensure the safe and efficient operation of the power plant.

Primary Duties

Your scope of responsibility as Combustion Turbine (CT) Technician will include the following primary functions: 

Start, stop, and operate combustion turbine-generators and auxiliaries as required while monitoring and recording readings from indicators and instruments to ensure safe operations within prescribed limits. Ensure alarms and upset conditions are properly cleared by taking appropriate corrective actions. Execute plant shutdown and start-up procedures as necessary to meet generating requirements, maintaining safe and efficient operation in compliance with environmental regulations (federal, state, and local). Read meters, gauges, or monitor automatic devices to record data such as equipment operating temperatures, vibrations, operating hours, pressure, and fluid levels to verify operating conditions. Observe, record, and evaluate system conditions, as well as maintain and review operational and maintenance reporting logs to keep management informed of unusual conditions. During maintenance and overhaul periods, report progress of work as needed, even when not on an assigned shift, may be required. Read P&ID diagrams and utilize facility operating procedures and equipment technical manuals to maintain, troubleshoot, and repair facility equipment to ensure equipment operates within the specified operating range. Overhaul and repair plant equipment such as combustion turbines, generators, pumps, fans, motors, gas compressors, and water treatment systems as required, with maintenance actions recorded on Work Order forms. Display full support of the Maximo Computerized Maintenance Management System (CMMS) and dedication to the facility maintenance philosophy. Understand, comply with, and take on specific tasks/responsibilities assigned in all regulatory procedures and facility safety standards. Keep all training requirements current, including First Aid, CPR, OSHA, using Web-Based GPi Learn, and other available training modules, seminars, and courses offered by NAES Corporation. When assigned to the control room, monitor the status of all plant systems on a continuous basis. Operate from established procedures under general directions and minimum supervision, with the authority to control plant operations safely, aiming for no recordable accidents in compliance with all environmental permits. Make decisions within prescribed operating guidelines. Conduct periodic log and record reviews to ensure that lockout/tagout procedures, equipment status, and designated administrative systems function effectively. Participate actively in the administrative maintenance of plant operating manuals, technical references, prints, diagrams, and preventive/predictive maintenance records. Assist in executing maintenance plans by offering assistance (Lockout/Tagout), equipment identification, troubleshooting, work request preparation, or other areas as needed.

NAES Safe

Safety is a core value of NAES and as a condition of employment, all employees are expected to be mentally alert and work safely at all times. Additionally, employees are required to adhere to all safety warnings and posted safety signs whenever on company property. Furthermore, employees must follow all NAES safety rules and procedures. Effectiveness in carrying out this responsibility is part of the evaluation of each employee’s performance.

Working Relationships

The CT Technician reports to the CT Supervisor and takes direction from plant management.

Physical Requirements and Working Conditions

Physical requirements include the possibility of standing for extended periods of time, stair and ladder climbing and routinely lifting up to 50 pounds. Protective equipment must be worn in the performance of some duties (e.g., hard hats, safety glasses, air masks, ear protection, chemical suits, hot gloves and high voltage protective equipment, etc.). Work with hazardous materials may be required. Must be able to be respirator qualified. There are extensive smoking restrictions in and around the facility.

Fitness for Duty

All employees will participate in the Fitness for Duty Program. This program includes post-offer physical examination and drug screening and post-employment random drug screening. 

Work Schedule

Position requires extended working hours and varied shifts with weekend and holiday work, as required by schedules, workload, and plant conditions. "On call" status will periodically be required.

Compensation

Initial starting rate of pay is $54.62 per hour.

Job Qualifications

Ability to understand procedures and instructions specific to the area of assignment as would be acquired in four years of high school. Advanced experience in the power generation or industrial maintenance field, specifically involving the operation and maintenance of combustion turbine-generators and auxiliary systems. Familiarity with Computerized Maintenance Management Systems (CMMS), such as Maximo, is preferred, along with a strong understanding of plant safety protocols and environmental regulations. Demonstrated ability to operate and maintain combustion turbine-generators and associated auxiliaries, including reading and interpreting meters, gauges, and P&ID diagrams. Experience in observing, recording, and evaluating system conditions, with a focus on maintaining operational and maintenance logs to ensure safe equipment operation within prescribed limits. Proficiency in overhauling and repairing plant equipment such as turbines, generators, pumps, and compressors, with a commitment to documenting maintenance actions accurately. Knowledge of regulatory procedures and facility safety standards, with the ability to handle hazardous materials safely and comply with all applicable regulations. Willingness to work shift hours, overtime, or irregular hours as required, while maintaining up-to-date training in First Aid, CPR, OSHA, and other relevant safety programs. Ability to support field technicians and collaborate effectively with team members, ensuring efficient execution of maintenance plans and adherence to safety and regulatory compliance programs. Must possess a valid and unrestricted driver's license, ensuring it remains in good standing at all times.

About NAES

NAES Corporation is the leading provider of operations, maintenance, and engineering services for energy facilities. We have established ourselves as a reliable partner for clients in North America and internationally, offering services across power generation, oil and gas, and renewable energy sectors. Additionally, our growing family of companies enables us to address the entire life cycle of power generation and other industrial plants.

NAES is committed to a diverse and inclusive workplace. It is the practice of NAES to seek employees of the highest quality and to select individuals on the basis of merit and competence, without regard to race, color, religion, national origin, gender, gender identity, sexual orientation, age, disability, military status or affiliation protected under USERRA, or any other basis of discrimination prohibited by applicable local, state and federal law.