Digital Circuit Card Designer
Lockheed Martin
Job ID: 680164BR Date posted: Nov. 11, 2024 Program: Orlando / SGS / RFS PC / RFS PC IRD
Description:As a Circuit Card Designer at MFC, you will join one of the largest networks of professionals, implementing cutting edge technologies on both existing and new development platforms. You will be helping us solve the world’s most difficult challenges supporting such wide-ranging domain areas such as aircraft flight command and control, air traffic control, health care, and homeland defense. We are a matrix engineering and technology organization so you will touch multiple programs over your career!
What You Will Be Doing
As a Circuit Card Designer, your responsibilities will include but are not limited to:
- Subject matter expert in high speed digital circuit and signal integrity analysis electrical designer.
- Focus on electrical design, simulation and verification/validation testing of high-speed printed circuit board design and electronic system.
- Work independently and serve as a subject matter expert in digital design and signal integrity to perform design, simulation, and validation activities through product development cycles.
It is possible that travel will be required to both customer and supplier sites. It is possible that travel will be both within and outside the Continental United States (CONUS).
Telecommuting opportunities can vary depending on daily tasking. For more details about the classification of this assignment, please see "Ability to Work Remotely".
Candidates filling this position will need a US citizen and will need a clearance at the level specified in “Clearance Level” or will need the ability to get a clearance if not specified. In addition to meeting security clearance requirements, candidate may need to be approved to work Special Access Program (SAP) prior to start of employment.
Basic Qualifications:
- Electrical Engineering degree or similar
- Skilled circuit card designer for digital circuits/components
- Proficient with high speed interfaces
- Proficient with Siemens Xpedition schematic tool
- Proficient with signal integrity analysis
Desired Skills:
- Excellent communication skills
- Experienced designer using DDR4s
- Familiar with AMD devices
Security Clearance Statement: This position requires a government security clearance, you must be a US Citizen for consideration.
Clearance Level: Secret
Other Important Information You Should Know
Expression of Interest: By applying to this job, you are expressing interest in this position and could be considered for other career opportunities where similar skills and requirements have been identified as a match. Should this match be identified you may be contacted for this and future openings.
Ability to Work Remotely: Part-time Remote Telework: The employee selected for this position will work part of their work schedule remotely and part of their work schedule at a designated Lockheed Martin facility. The specific weekly schedule will be discussed during the hiring process.
Work Schedules: Lockheed Martin supports a variety of alternate work schedules that provide additional flexibility to our employees. Schedules range from standard 40 hours over a five day work week while others may be condensed. These condensed schedules provide employees with additional time away from the office and are in addition to our Paid Time off benefits.
Schedule for this Position: 4x10 hour day, 3 days off per week
Lockheed Martin is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.
The application window will close in 90 days; applicants are encouraged to apply within 5 - 30 days of the requisition posting date in order to receive optimal consideration.
At Lockheed Martin, we use our passion for purposeful innovation to help keep people safe and solve the world's most complex challenges. Our people are some of the greatest minds in the industry and truly make Lockheed Martin a great place to work.
With our employees as our priority, we provide diverse career opportunities designed to propel, develop, and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. We place an emphasis on empowering our employees by fostering an inclusive environment built upon integrity and corporate responsibility.
If this sounds like a culture you connect with, you’re invited to apply for this role. Or, if you are unsure whether your experience aligns with the requirements of this position, we encourage you to search on Lockheed Martin Jobs, and apply for roles that align with your qualifications.
Experience Level: Experienced Professional
Business Unit: MISSILES AND FIRE CONTROL
Relocation Available: Possible
Career Area: Hardware Engineering
Type: Full-Time
Shift: First
Description:As a Circuit Card Designer at MFC, you will join one of the largest networks of professionals, implementing cutting edge technologies on both existing and new development platforms. You will be helping us solve the world’s most difficult challenges supporting such wide-ranging domain areas such as aircraft flight command and control, air traffic control, health care, and homeland defense. We are a matrix engineering and technology organization so you will touch multiple programs over your career!
What You Will Be Doing
As a Circuit Card Designer, your responsibilities will include but are not limited to:
- Subject matter expert in high speed digital circuit and signal integrity analysis electrical designer.
- Focus on electrical design, simulation and verification/validation testing of high-speed printed circuit board design and electronic system.
- Work independently and serve as a subject matter expert in digital design and signal integrity to perform design, simulation, and validation activities through product development cycles.
It is possible that travel will be required to both customer and supplier sites. It is possible that travel will be both within and outside the Continental United States (CONUS).
Telecommuting opportunities can vary depending on daily tasking. For more details about the classification of this assignment, please see "Ability to Work Remotely".
Candidates filling this position will need a US citizen and will need a clearance at the level specified in “Clearance Level” or will need the ability to get a clearance if not specified. In addition to meeting security clearance requirements, candidate may need to be approved to work Special Access Program (SAP) prior to start of employment.
Basic Qualifications:
- Electrical Engineering degree or similar
- Skilled circuit card designer for digital circuits/components
- Proficient with high speed interfaces
- Proficient with Siemens Xpedition schematic tool
- Proficient with signal integrity analysis
Desired Skills:
- Excellent communication skills
- Experienced designer using DDR4s
- Familiar with AMD devices
Security Clearance Statement: This position requires a government security clearance, you must be a US Citizen for consideration.
Clearance Level: Secret
Other Important Information You Should Know
Expression of Interest: By applying to this job, you are expressing interest in this position and could be considered for other career opportunities where similar skills and requirements have been identified as a match. Should this match be identified you may be contacted for this and future openings.
Ability to Work Remotely: Part-time Remote Telework: The employee selected for this position will work part of their work schedule remotely and part of their work schedule at a designated Lockheed Martin facility. The specific weekly schedule will be discussed during the hiring process.
Work Schedules: Lockheed Martin supports a variety of alternate work schedules that provide additional flexibility to our employees. Schedules range from standard 40 hours over a five day work week while others may be condensed. These condensed schedules provide employees with additional time away from the office and are in addition to our Paid Time off benefits.
Schedule for this Position: 4x10 hour day, 3 days off per week
Lockheed Martin is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.
The application window will close in 90 days; applicants are encouraged to apply within 5 - 30 days of the requisition posting date in order to receive optimal consideration.
At Lockheed Martin, we use our passion for purposeful innovation to help keep people safe and solve the world's most complex challenges. Our people are some of the greatest minds in the industry and truly make Lockheed Martin a great place to work.
With our employees as our priority, we provide diverse career opportunities designed to propel, develop, and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. We place an emphasis on empowering our employees by fostering an inclusive environment built upon integrity and corporate responsibility.
If this sounds like a culture you connect with, you’re invited to apply for this role. Or, if you are unsure whether your experience aligns with the requirements of this position, we encourage you to search on Lockheed Martin Jobs, and apply for roles that align with your qualifications.
Experience Level: Experienced Professional
Business Unit: MISSILES AND FIRE CONTROL
Relocation Available: Possible
Career Area: Hardware Engineering
Type: Full-Time
Shift: First
Confirm your E-mail: Send Email
All Jobs from Lockheed Martin