Summary This Electrician position is located in the Engineering Service at the VA Boston Healthcare System. NOTE: This is an open and continuous job opportunity announcement. Certificates are issued on an unannounced periodic basis based on requests from management. Applications will be evaluated and referred for selection as vacancies occur within the organization. This announcement may close at any time once all positions are filled. Responsibilities This position is located within the VA Boston Healthcare System in West Roxbury, Massachusetts and is responsible for installing, modifying, repairing, maintaining, troubleshooting, testing, and loading new and existing electrical lines, circuits, systems and associated fixtures, controls, and equipment. Works with secondary power distribution lines and circuits used to supply a wide range of voltage, amperage, phase, and frequency requirements, to distribution panels, switchgear, power and control circuits, industrial multiphase systems, thermocouple sensors, emergency warning systems, lighting protection systems, high intensity lighting systems with associated controls, target mechanisms, AC/DC rectification systems, galvanic and impressed current cathode protection systems, amplifier circuits and related electrical equipment; Works from building plans, blueprints, wiring diagrams, engineering drawings, and electrical maintenance and repair manuals; Plans and lays out the routing, placement type, size, gauge, balance, load, continuity, and safe operation of electrical lines, circuits, systems, equipment and controls that support industrial operations, computer complexes, or similar complex electrical loads; Traces hard-to-locate defects or problems associated with the completion of repairs and installations; Determines and places distribution panels, boxes, fittings, and connections and installs wiring, couplings, conduit, relays, fixtures, transformers and other electrical devices including electrical service entrances; Interprets and applies the National Electrical Code, local codes, etc., and uses trade formulas to calculate common properties; Uses a variety of hand and power tools of the trade; Performs all other related duties as assigned. Work Schedule: Monday through Friday, 7:00am - 3:30pm Recruitment & Relocation Incentives: Not authorized Position Description Title/PD#: Electrician/PD523-00859-A Critical Skills Incentive (CSI): This occupation is currently approved for a Veterans Health Administration enterprise-wide Critical Skills Incentive through 10/05/2024. Candidates may be eligible for a lump sum CSI for a pro-rated amount if onboard prior to the CSI expiration date. Eligible candidates will be required to sign a service agreement agreeing to an obligated service period and failure to complete the obligated service period may result in a debt for the unearned portion of the CSI. Requirements Conditions of Employment Qualifications To qualify for this position, applicants must meet all requirements by the closing date of this announcement. EXPERIENCE: A specific length of training and experience is not required, but you must show evidence of training or experience of sufficient scope and quality of your ability to do the work of this position. Evidence which demonstrates you possess the knowledge, skills, and ability to perform the duties of this position must be supported by detailed descriptions of such on your resume. Applicants will be rated in accordance with the OPM Federal Wage System Qualification Standards. SCREEN-OUT ELEMENT: Your qualifications will first be evaluated against the prescribed screen out element, which usually appears as question 1 in the on-line questionnaire. Those applicants who appear to possess at least the minimal acceptable qualification requirement are considered for further rating; those who do not are rated ineligible and are eliminated. The potential eligibles are then rated against the remainder of the Job Elements: Ability to Do the Work of the Position without More Than Normal Supervision Ability to Use and Maintain Hand Tools (Electrical Work) Ability to Use Electrical Drawings Knowledge of Electrical Equipment Technical Practices (Theoretical, Precise, Artistic) Theory and Instruments (Electrical, Electronic) Used in Shop and Trade Practices Troubleshooting (Electrical) Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religions; spiritual; community; student; social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience. Note: A full year of work is considered to be 35-40 hours of work per week. Part-time experience will be credited on the basis of time actually spent in appropriate activities. Applicants wishing to receive credit for such experience must indicate clearly the nature of their duties and responsibilities in each position and the number of hours a week spent in such employment. Major Duties Installs, modifies, repairs, maintains, troubleshoots, tests, and loads new and existing electrical lines, circuits, systems, and associated fixtures, controls, and equipment. These include secondary power distribution lines and circuits used to supply a wide range of voltage, amperage, phase, and frequency requirements, to distribution panels, switchgear, power and control circuits; industrial multiphase systems; thermocouple sensors; electrical intrusion alarm and fire alarm system; emergency warning systems; lighting protection systems; high intensity lighting systems with associated controls; target mechanisms; AC and DC rectification systems; galvanic and impressed current cathodic projection systems which prevent corrosion on underground or submerged equipment and pipes; amplifier circuits; and related electrical equipment. Works from building plans, blueprints, wiring diagrams, engineering, drawings, and electrical maintenance and repair manuals to plan and lay out the routing, placement type, size, gauge, balance, load, continuity, and safe operation of electrical lines, circuits, systems, equipment and controls that support industrial operations, computer complexes, or similar complex electrical loads. Traces hard-to-locate defects or problems associated with the completion of repairs and installations. Determines and places distribution panels, boxes, fittings, and connections and install wiring, couplings, conduit, relays, fixtures, transformers and other electrical devices including electrical service entrances. Skill and Knowledge Knowledge of the operation and installation of a variety of complete electrical systems and equipment, such as series, parallel, and compound circuits for single and multiple phase alternating current of varying voltage, amperage, and frequency; wiring systems in industrial complexes and in buildings; and power or regulating and control circuits and distribution panels to industrial machinery, ships' control equipment, computers or laboratory and other electrical equipment in order to plan, lay out, install, modify, troubleshoot, and repair a variety of complete systems as well as any parts of these systems. Knowledge of the various gauges, sizes, and types of wire, conduit, couplings, fittings, relays, boxes, circuit breakers, and other electrical devices, and the ability to arrange and install them in ways that insure proper and safe operation of electrical systems and equipment. Ability to interpret and apply the National Electrical Code, local codes, building plans, blueprints, wiring diagrams, and engineering drawings, and to use trade formulas to calculate common properties, e.g., voltage, voltage drop and current capability in series and parallel circuits, resistance, inductance, capacitance, power factor, current flow, and temperature, and length in single and multiple raceways, conduits, gutters, and cable trays. Skill in the use of hand tools; power tools, such as cable pullers, hydraulic benders, and pipe threading machines; and a wide variety of test equipment, for example, meggers, multi-meters, frequency meters, watt meters, power factor meters, vibro-grounds, phase rotation meters, audio tone location equipment, high potential testers, ground fault interrupter testing equipment, recording amp meters, circuit analyzers, circuit breaker testers, resistance bridges, and cathodic protection test sets. Knowledge of National Electrical Code requirements in order to ensure the safe and proper operation of systems and equipment. Basic familiarity with electronics to recognize parts, such as resistors, capacitors, and transistors; operate basic test equipment such as signal generators, signal tracers, and oscilloscopes; and read schematics of uncomplicated assemblies to determine locations of defective parts. PHYSICAL EFFORT: Repairs and installations are made from ladders, scaffolding, platforms and other hard-to-reach places. This requires the employee to stand, stoop, bend, kneel, climb, and working in tiring and uncomfortable positions. The work requires frequently lifting and carrying of tools, equipment and parts that weight up to 20 pounds and occasionally up to 40 pounds. WORK CONDITIONS: The work is performed both inside and outside. The Electrician is sometimes required to make repairs and installations in bad weather and work in areas that are noisy, dirty, dusty, and greasy on scaffolding or cranes at heights of 30 feet or more and in close quarters such as manholes and attics. There is exposure to the possibility of injury from falling, electrical shock, burns, and injuries from rotary devices such as electrical motors and is frequently exposed to the possibility of cuts and bruises. Education Additional Information Participation in the seasonal influenza program is a requirement for all Department of Veterans Affairs Health Care Personnel (HCP). It is a requirement that all HCP to receive annual seasonal influenza vaccination or obtain an exemption for medical or religious reasons. Wearing a face mask is required when an exemption to the influenza vaccination has been granted. HCP in violation of this directive may face disciplinary action up to and including removal from federal service. HCP are individuals who, during the influenza season, work in VHA locations or who come into contact with VA patients or other HCP as part of their duties. VHA locations include, but are not limited to, VA hospitals and associated clinics, community living centers (CLCs), community-based outpatient clinics (CBOCs), domiciliary units, Vet centers and VA-leased medical facilities. HCP include all VA licensed and unlicensed, clinical and administrative, remote and onsite, paid and without compensation, full- and part-time employees, intermittent employees, fee basis employees, VA contractors, researchers, volunteers and health professions trainees (HPTs) who are expected to perform any or all of their work at these facilities. HPTs may be paid or unpaid and include residents, interns, fellows and students. HCP also includes VHA personnel providing home-based care to Veterans and drivers and other personnel whose duties put them in contact with patients outside VA medical facilities. Pursuant to VHA Directive 1193.01, VHA health care personnel (HCP) are required to be fully vaccinated against COVID-19 subject to such accommodations as required by law (i.e., medical, religious or pregnancy). VHA HCPs do not include remote workers who only infrequently enter VHA locations. If selected, you will be required to be fully vaccinated against COVID-19 and submit documentation of proof of vaccination before your start date. The agency will provide additional information regarding what information or documentation will be needed and how you can request a legally required accommodation from this requirement using the reasonable accommodation process. The Interagency Career Transition Assistance Plan (ICTAP) and Career Transition Assistance Plan (CTAP) provide eligible displaced VA competitive service employees with selection priority over other candidates for competitive service vacancies. To be well-qualified, applicants must possess experience that exceeds the minimum qualifications of the position including all selective factors if applicable, and must be proficient in most of the requirements of the job. Information about ICTAP and CTAP eligibility is on OPM's Career Transition Resources website which can be found at https://www.opm.gov/. Receiving Service Credit for Earning Annual (Vacation) Leave: Federal Employees earn annual leave at a rate (4, 6 or 8 hours per pay period) which is based on the number of years they have served as a Federal employee. VA may offer newly-appointed Federal employee's credit for their job-related non-federal experience or active duty uniformed military service. This credited service can be used in determining the rate at which they earn annual leave. Such credit must be requested and approved prior to the appointment date and is not guaranteed. This job opportunity announcement may be used to fill additional vacancies.