Summary THIS IS A NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION. This National Guard position is for a ELECTRONIC MEASUREMENT EQUIPMENT MECHANIC (SSC), Position Description Number PDD1201000 and is part of the WY Combined Support Maintenance Shop, Wyoming Army National Guard. This is a Title 32 Dual Status Technician Excepted Service position. Military affiliation is required. Responsibilities The primary purpose of this position is to perform calibration, diagnostics repair, and certification of electronic, mechanical, and radiation Test Measurement and Diagnostic Equipment (TMDE). (1) Calibrates and repairs TMDE within support capability and authority including various levels of calibration as designated in technical bulletins, manuals, etc. (2) Sets up system test sets and various types of test equipment such as frequency meters, standing wave ratio meters, radio frequency (RF) power meters, function/ arbitrary waveform generator, distortion analyzers, time frequency workstations, oscillators, voltmeters, electronic counters, oscilloscopes, attenuators, decade resistors and capacitors, signal generators, stroboscope, tachometers, pneumatic and hydraulic pressure standards and other physical and electronic tests. (3) Following repair, tests by applying signals in known amplitude and wave shape into oscilloscopes to observe wave pattern. (4) Determines purpose in operation characteristics of each major section. (5) Completes necessary Army Maintenance Management System (TAMMS), calibration, radiation reports and other records and forms on work completed. ** This is NOT an all-inclusive list of duties. ** Requirements Conditions of Employment KEY REQUIREMENTS: Open to all United States military branches. Military members: Submit ERB, DA Fm 2-1, STP, vMPF rip, DVR, ERS, MBS, PDR or equivalent with resume. Refer to Required Documents below for acronym titles. Prior service members: Submit a DD Form 214, Member 4 Copy WYARNG Recruiting Website: https://www.nationalguard.com/wyoming Must be assessed into WY ARNG before appt. May take up to 120 days. Must become a member of the Wyoming Army Nat'l Guard before appt. Must submit ERB or DA Fm 2-1 with application. May be required to successfully complete a trial/probationary period. Federal employment suitability as determined by a background investigation. Recruitment/Relocation Incentive MAY BE authorized, if eligible. Subject to funding and TAG approval. PCS is not authorized in lieu of incentives. EMPLOYMENT CONDITIONS: Technicians are paid through Direct Deposit/Electronic Funds Transfer (DD/EFT). Military Technicians are ineligible for military enlistment, retention, and student loan repayment bonuses. Acceptance of a Technician position over 180 days will result in suspension or termination of these military incentives. It is the applicant's responsibility to contact the Wyoming Army National Guard Education Services Officer, (307) 772-5126 for more information regarding military enlistment, retention, and student loan repayment incentives. Military Technicians in the excepted service will wear the appropriate uniform while performing as a Technician. Veteran's preference does not apply to National Guard Technician positions in accordance with Title 32 USC 709(f). 1. Able to obtain and maintain the appropriate security clearance of the position. 2. Covered by the Domestic Violence Misdemeanor Amendment (30 Sep 96) of the Gun Control Act (Lautenberg Amendment) of 1968. An individual convicted of a qualifying crime of domestic violence may not perform the duties of this position. 3. Ability to establish effective professional working relationships with coworkers and customers, contributing to a cooperative working environment and successful accomplishment of the mission. 4. May occasionally be required to work other than normal duty hours; overtime may be required. 5. Duties and responsibilities of your job may significantly impact the environment. You are responsible to maintain awareness of your environmental responsibilities as dictated by legal and regulatory requirements, your organization, and its changing mission. Qualifications TECHNICIAN INFO Type of Appointment: Permanent Tenure: Group 1 or 2 Work Schedule: Monday - Friday, 7:00 am - 4:30 pm FLSA: Exempt Telework: The duties of this position require primary physical presence. Situational telework may be considered on a case-by-case basis. Para/Line: 6021/145 Selecting Official: CSM Tim Smith AREAS OF CONSIDERATION: Referrals of qualified applicants will be issued in the following order: Area 1: All permanent and indefinite Wyoming National Guard (NG) WY ARNG employees assigned to the CSMS. Area 2: All permanent and indefinite Wyoming National Guard (NG) T32 Dual Status technicians employed within the Wyoming National Guard. Area 4: All current Drill Status Airmen and M-day soldiers of the Wyoming National Guard. Area 6: Current military members of the United States military branches or prior service members of one of those military branches. Must be willing/eligible to join the Wyoming Army National Guard as a military member prior to appointment to position. MILITARY GRADE In-State Applicants: Min: E2/PV2 Max: E8/MSG Out-of-State Applicants: Min: E2/PV2 Max: E7/SFC Out-of-State enlisted applicant's military grade cannot exceed the maximum military grade authorized. Over-grade applicants must provide a written demotion statement of understanding with application, willingness to be administratively reduced in grade (E7/SFC) if selected for this position. A Demotion Statement of Understanding is located at: https://go.usa.gov/xEeWG Enlisted Applicants' under- or over-grade (without a written demotion statement of understanding with application) will not be considered for this vacancy. Acceptance of this position does not in any way constitute a military promotion. DESCRIPTION OF WORK: Work involved in the maintenance, repairs, calibration, and certification of electronic test, measurement, and reference equipment used for precise measurement of a variety of electrical and electronic values. Quantities and relationships such as voltage, resistance, capacitance, frequency, and inductance. MINIMUM REQUIREMENTS: Must possess experience or training which demonstrates a working knowledge of electronic principles involved in the generation and measurement of such elements as voltage, current, impedance, capacitance, frequency, and inductance. Experience in the use of various precision measurement instruments and standards. SPECIALIZED EXPERIENCE: Must possess experience or training with basic application of operating principles such as the production and utilization of oscillations over a broad range of frequencies; signal and waveform behavior, distortion, and amplification; pulse, trigger, and synchronization techniques; and a variety of display and indication methods. Experience in tracing signals and voltage paths, and skilled in the analysis of waveform characteristics such as timing, duration, frequency, and phasing. Originates test set-ups to isolate malfunctions and check performance characteristics of special or unique test panels or mockups. Experience in interpreting and applying a variety of technical electronic information such as schematic symbols, mathematical expressions and formulas, calibration procedures, and other reference materials. Experience in applying established techniques and methods of repair, testing, alignment, and calibration of equipment, which serves as test equipment or precision measurement standards. Experience in utilizing electronic circuits to measure electronic or electrical quantities to determine the performance characteristics and accuracy of other instruments and equipment. MILITARY REQUIREMENTS: Selected candidates will be required to be in a compatible military grade and assignment prior to the effective date of placement. DRIVER'S LICENSE: Must possess a valid driver's license. Education Additional Information If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered, or you are not eligible for appointment in this agency (https://www.sss.gov/register/) The Wyoming Military Department's (WYMD) 335, Personnel - General Merit Placement & Promotion Plan, is available at:https://www.wyomilitary.wyo.gov/wp-content/uploads/2023/04/WYMD-335-MPP-15-April-2023.pdf Please do not send/fax/courier/email any applications or resumes to the Wyoming National Guard Human Resource Office, you must apply on-line via www.USAJOBS.gov. The Human Resource can only process materials received through USA Jobs. Military Technicians are ineligible for military enlistment, retention, student loan repayment bonuses, and other education incentives. Acceptance of a Technician position over 180 days will result in suspension or termination these military incentives. Contact unit representative or Wyoming Army National Guard Education Services Officer at (307) 772-5126 for more information.