Summary You will serve as a Senior Engineer in Code 1532 of NAVUNSEAWARCENDIV NEWPORT RI. This position is part of the Warfare Centers Personnel Demonstration Project. The ND-5 pay band encompasses positions equivalent to the GS-14 and GS-15. Responsibilities You will perform a variety of tasks in the support of systems engineering and acquisition of Towed and Hull Array systems onsite at Lockheed Martin Syracuse representing PMS 401, Submarine Acoustic Systems. You will serve as a recognized authority and expert consultant on Towed and Hull sensor systems and development, Towed Array Production, Next Generation towed systems, acoustic transducers/hydrophones, and DoD acquisition. You will serve as a recognized authority and expert consultant on Service Cost Centers, systems engineering, test and evaluation, risk management, and program management. You will establish, oversee, and control technical milestones, schedules, contracts, budgets and costs to ensure project success, and adapts technical requirements and plans to meet evolving sponsor or programmatic needs. You will represent the activity on high-level committees and groups, and is recognized as a subject matter expert for assigned systems at the onsite activity. You will work as a leader of a team of engineers, managers, and acquisition specialists. You will support systems engineering efforts through the development of towed systems technical requirements, and through the development of specifications for towed and hull array performance. Requirements Conditions of Employment Qualifications This is an interdisciplinary position and may be filled by a Mechanical Engineer (0830-series), an Electrical Engineer (0850-series) or an Electronics Engineer (0855-series) depending upon the qualifications of the candidate. Applicants in positions with occupational series other than those listed (0830, 0850, 0855) may apply; however, you must apply directly to the series listed in this vacancy that is most applicable to your qualifications. Your resume must demonstrate at least one year of specialized experience at or equivalent to the ND-4 pay band (GS-12 and GS-13 equivalency) in the Federal service or equivalent experience in the private or public sector as a professional engineer providing subject matter expertise or program management utilizing extensive technical knowledge in the area of systems engineering. Additional qualification information can be found from the following Office of Personnel Management website: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=List-by-Occupational-Series AND https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/files/all-professional-engineering-positions-0800.pdf Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Education Applicants must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual: Successful completion of a professional engineering degree. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position. OR Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at: http://www.nspe.org OR Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico The FE examination is not administered by the U. S. Office of Personnel Management. For more information, please visit: http://www.nspe.org/Licensure/HowtoGetLicensed/index.html. OR Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements under paragraph A (above). The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above) OR Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. Additional Information This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. During the application process you will have an option to opt-in to make your resume available to hiring managers in the agency who have similar positions in the local commuting area. If you opt-in and are referred on a certificate, your resume will be available to other hiring managers for 180-days from the date the job announcement closes. Opting in does not impact your application for this announcement, nor does it guarantee further consideration for additional positions. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: http://www.secnav.navy.mil/donhr/Documents/CivilianJobs/FedCivAnnuitants.pdf PPP applicants: PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation. ICTAP Applicants: To be considered well-qualified and exercise selection priority as an ICTAP candidate, displaced Federal employees must satisfy all qualification requirements for the position and receive a rating in the highly qualified category (score 85) or higher. ICTAP candidates must provide copies of all of the following documentation at the time of application: 1) agency notice; 2) most recent performance appraisal; and 3) most recent SF-50 or notification of personnel action that includes position, grade level, and duty location. Applicants who do not provide this documentation will not receive consideration as an ICTAP candidate. For more information about ICTAP eligibility please review the following link: https://www.usajobs.gov/Help/working-in-government/unique-hiring-paths/federal-employees/career-transition/ Military Spouse Preference Applicants: Military Spouse Preference applicants will be placed at the highest grade for which they have applied and are determined Best Qualified (BQ). A BQ military spouse possesses knowledge, skills, abilities, and competencies comparable to others who meet the competitive referral criteria for the specific position. Acquisition Workforce (AWF) members must complete 80 hours of Continuous Learning Points (CLPs) every two (2) years, in accordance with DoDI 5000.66. Workforce members are encouraged to earn their CLPs by completing Defense Acquisition University (DAU) Credentials. Obtaining certification within the allotted grace period and maintaining CLPs before and after achieving certification are conditions of employment. Failure to meet these requirements could result in disciplinary action and/or removal from employment. Incumbent may be exposed to hazardous surroundings both in shipyards and/or on ships and is expected to use standard operating procedures and safety equipment as required to mitigate these risks.