Summary You will serve as an INTERDISCIPLINARY GENERAL ENGINEER/ARCHITECT in the Project Management Branch NAVAL FAC ENGINEERING CMD FAR EAST. ACCESS TO MEDICAL AND DENTAL CARE IN JAPAN IS EXTREMELY LIMITED. Please see Additional Information section below. Responsibilities You will develop and implement regional policy on all project management issues. You will provide technical expertise to the project team consisting of Construction managers, Contract Specialists, Project Technical Teams, and other Business Line Representatives. You will interpret codes, standards, regulations and policies to effect good business decisions and successful project execution. You will review the work by team members and Architect-Engineer consultants for conformance with applicable criteria to ensure safety, quality, and cost effectiveness. You will manage Indefinitely Quantity (IQ) contracts and may function as the Contracting Officer's Representative for services provided by consultants. Requirements Conditions of Employment Qualifications GS-12 In addition to the Basic Education Requirements for this position, your resume must also demonstrate at least one year of specialized experience at or equivalent to the GS-12 or pay band in the federal service or equivalent experience in the private or public sector demonstrating the following: 1) Project Management knowledge and expertise for technical engineering and/or architectural services for a broad range of facilities. 2) Knowledge and experience in all aspects of design and construction contract acquisition strategies, project programming, planning, and project budget estimates for preliminary design deliverables, design scope development, design oversight, and construction oversight and other required services. 3) Knowledge and experience in identifying areas of risk associated with design and construction and develops mitigation strategies or alternatives. PE or RA is NOT required. GS-13 In addition to the Basic Education Requirements for this position, your resume must also demonstrate at least one year of specialized experience at or equivalent to the GS-12 or pay band in the federal service or equivalent experience in the private or public sector demonstrating the following: 1) Project Management knowledge and expertise for technical engineering and/or architectural services for a broad range of facilities. 2) Knowledge and experience in all aspects of design and construction contract acquisition strategies, project programming, planning, and project budget estimates for preliminary design deliverables, design scope development, design oversight, and construction oversight and other required services. 3) Knowledge and experience in identifying areas of risk associated with design and construction and develops mitigation strategies or alternatives. PE or RA is required. Additional qualification information can be found from the following Office of Personnel Management website: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=GS-PROF and https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/all-professional-engineering-positions-0800/ Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Additional Information Continued: Military Spouse Preference applicants will be placed at the highest grade for which they have applied and are determined Best Qualified (BQ). A BQ military spouse possesses knowledge, skills, abilities, and competencies comparable to others who meet the competitive referral criteria for the specific position. Only Military Spouse Preference/PPP applicants currently occupying positions for which a comprehensive training plan has been developed and authorized are entitled to exercise their priority status for this announcement. The most common formal training positions are apprentices, formal interns, and scientist and engineering interns. Upward Mobility Positions that have equivalent training plans are also included when the positions have been pre-identified in an Affirmative Action or similar plan. You must provide documentation supporting you are in a formal training plan (e.g., SF50 and official signed training agreement between you and your command). PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation. Education For the GS-0801: Successful completion of a professional engineering degree. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position. OR Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at: http://www.nspe.org OR Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico The FE examination is not administered by the U. S. Office of Personnel Management. For more information, please visit: http://www.nspe.org/Licensure/HowtoGetLicensed/index.html. OR Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements under paragraph A (above). The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above) OR Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. For the GS-0808: Degree: architecture; or related field that included 60 semester hours of course work in architecture or related disciplines of which at least (1) 30 semester hours were in architectural design, and (2) 6 semester hours were in each of the following: structural technology, properties of materials and methods of construction, and environmental control systems. or Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the arts and sciences underlying professional architecture, and (2) a good understanding, both theoretical and practical, of the architectural principles, methods, and techniques and their applications to the design and construction or improvement of buildings. The adequacy of such background must be demonstrated by at least one of the following: Related Curriculum: Degree in architectural engineering may be accepted as satisfying in full the basic requirements, provided the completed course work in architectural engineering provided knowledge, skills, and abilities substantially equivalent to those provided in the courses specified in paragraph A. The curriculum for a degree in either architecture or architectural engineering covers function, esthetics, site, structure, economics, mechanical-electrical, and other engineering problems related to the design and construction of buildings primarily (but not exclusively) intended to house human activities. The courses required for a degree in architecture generally place emphasis upon planning, esthetics, and materials and methods of construction, while the courses for an architectural engineering degree place equal or greater weight on the technical engineering aspects such as structural systems, mechanical systems, and the properties of materials. Because of this difference in emphasis, persons with degrees in architecture may have a preference for work assignments that offer greater opportunities for them to express their artistic and creative abilities. As a result, they may be more concerned with planning and design aspects of architecture, and persons with degrees in architectural engineering may be more engaged in aspects emphasizing technical engineering considerations. Experience: An applicant lacking a degree in architecture must have had l year of experience in an architect's office or in architectural work for each year short of graduation from a program of study in architecture. In the absence of college courses, 5 years of such experience is required. This experience must have demonstrated that the applicant has acquired a thorough knowledge of the fundamental principles and theories of professional architecture. Additional Information Employees (and their family members) who require medical or dental care in Japan may experience severe limitations accessing medical care both on the military installation and the local economy, and also could incur costly medical expenses. This position is covered by the Department of Defense Priority Placement and Alternate Placement Programs. Additional vacancies may be filled by this announcement. Pay retention may be granted when certain conditions are met. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. A relocation incentive may be authorized. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. During the application process you will have an option to opt-in to make your resume available to hiring managers in the agency who have similar positions in the local commuting area. Depending on the hiring organization and the position being filled, job requirements (e.g., security clearance, travel, drug testing, financial disclosure filing, bargaining unit status, etc.) may vary. Other hiring managers filling similar positions may offer relocation expense reimbursement and/or may offer recruitment incentives for new employees, depending on funding availability and in accordance with policy. If you opt-in and are referred on a certificate, your resume will be available to other hiring managers for 180-days from the date the job announcement closes. Opting in does not impact your application for this announcement, nor does it guarantee further consideration for additional positions. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: http://www.secnav.navy.mil/donhr/Documents/CivilianJobs/FedCivAnnuitants.pdf Veteran's preference does not apply when selecting individuals under the specific hiring authority addressed in the Summary section of this announcement. However, if you claim veteran's preference, you will be required to submit supporting documentation with your application as described in the Required Documents section below. Tour of duty will be 36 months. Priority consideration will be given to military spouse preference and family member preference eligible residing in the commute area of the duty location for this position. Commute area is defined as the geographic area surrounding the duty location in which people can reasonably be expected to travel back and forth daily. To learn more about the living and working conditions at this military installation and additional Overseas information, please go to: https://www.secnav.navy.mil/donhr/Overseas/Pages/default.aspx This position is subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.