Under minimal supervision, set up, adjust, perform preventative maintenance, troubleshoot, repair, and maintain assigned equipment with responsibility for production and quality.

Core Responsibilities

Perform preventive maintenance, routine inspections, and ad-hoc repairs on assigned conveyors, automation, robotics and ancillary equipment as needed.Perform routine troubleshooting of assigned out of service equipment and correct issues, act as an escalation point for lower level technicians, and escalate to leadership and/or more senior technicians as needed. Record all maintenance issues in maintenance log for each line. Document all work in the computerized maintenance management system (CMMS) and ticketing systems as appropriate and maintain accurate records of all operating logs for fire pumps, generators, HVAC equipment, and other facility systems that are tested on a routine basis.Mentor all maintenance personnel in developing appropriate skillsets and knowledge of equipment.Assist maintenance mechanics in work that requires two people or when operational needs demand.Perform facility/building project work as assigned. Tasks include, but are not limited to, light bulb/ballast replacement, door repairs, furniture installation, ceiling tile replacement, carpentry duties, plaumbing repairs and maintaining operation logs.Assemble and test equipment to verify correct operation and production. Analyze and record cause of production delays on daily production reports and initiate procedures to solve equipment malfunctions. Examine defects and analyze spoilage causes and, where possible, take corrective action and verify the corrective action has eliminated the problems.Ability to certify on all industrial lift equipment. Pickers, Reaches, Skates, Booms, Scissor lifts, etc.Oversee projects as assigned. Projects will include minor space renovations, inventory management, contractor oversight, and building efficiency improvements.Oversee, inspect, and monitor the routine maintenance provided by junior engineers. Will also provide guidance and training as needed.

Basic Qualifications

Education

High school diploma or equivalent

Relevant Work Experience

5 years of experience with conveyor, automation, or robotics equipment repair and maintenance

Medline Industries, LP, and its subsidiaries, offer a competitive total rewards package, continuing education training, and tremendous potential with a growing worldwide organization.The anticipated salary range for this position is $29.50 - $41.25 per hour. This salary range is an estimate and the actual salary will vary based on applicant’s location, education, experience, skills, and abilities. Medline will not pay less than the applicable minimum wage or salary threshold.Our benefit package includes health insurance, life and disability, 401(k) contributions, paid time off, etc., for employees working 30 or more hours per week on average. For a more comprehensive list of our benefits please clickhere.For roles where employees work less than 30 hours per week, benefits include 401(k) contributions as well as access to the Employee Assistance Program, Employee Resource Groups and the Employee Service Corp.

Under minimal supervision, set up, adjust, perform preventative maintenance, troubleshoot, repair, and maintain assigned equipment with responsibility for production and quality.

Core Responsibilities

Perform preventive maintenance, routine inspections, and ad-hoc repairs on assigned conveyors, automation, robotics and ancillary equipment as needed.Perform routine troubleshooting of assigned out of service equipment and correct issues, act as an escalation point for lower level technicians, and escalate to leadership and/or more senior technicians as needed. Record all maintenance issues in maintenance log for each line. Document all work in the computerized maintenance management system (CMMS) and ticketing systems as appropriate and maintain accurate records of all operating logs for fire pumps, generators, HVAC equipment, and other facility systems that are tested on a routine basis.Mentor all maintenance personnel in developing appropriate skillsets and knowledge of equipment.Assist maintenance mechanics in work that requires two people or when operational needs demand.Perform facility/building project work as assigned. Tasks include, but are not limited to, light bulb/ballast replacement, door repairs, furniture installation, ceiling tile replacement, carpentry duties, plaumbing repairs and maintaining operation logs.Assemble and test equipment to verify correct operation and production. Analyze and record cause of production delays on daily production reports and initiate procedures to solve equipment malfunctions. Examine defects and analyze spoilage causes and, where possible, take corrective action and verify the corrective action has eliminated the problems.Ability to certify on all industrial lift equipment. Pickers, Reaches, Skates, Booms, Scissor lifts, etc.Oversee projects as assigned. Projects will include minor space renovations, inventory management, contractor oversight, and building efficiency improvements.Oversee, inspect, and monitor the routine maintenance provided by junior engineers. Will also provide guidance and training as needed.

Basic Qualifications

Education

High school diploma or equivalent

Relevant Work Experience

5 years of experience with conveyor, automation, or robotics equipment repair and maintenance

Medline Industries, LP, and its subsidiaries, offer a competitive total rewards package, continuing education training, and tremendous potential with a growing worldwide organization.The anticipated salary range for this position is $29.50 - $41.25 per hour. This salary range is an estimate and the actual salary will vary based on applicant’s location, education, experience, skills, and abilities. Medline will not pay less than the applicable minimum wage or salary threshold.Our benefit package includes health insurance, life and disability, 401(k) contributions, paid time off, etc., for employees working 30 or more hours per week on average. For a more comprehensive list of our benefits please clickhere.For roles where employees work less than 30 hours per week, benefits include 401(k) contributions as well as access to the Employee Assistance Program, Employee Resource Groups and the Employee Service Corp.

Under minimal supervision, set up, adjust, perform preventative maintenance, troubleshoot, repair, and maintain assigned equipment with responsibility for production and quality.

Core Responsibilities

Perform preventive maintenance, routine inspections, and ad-hoc repairs on assigned conveyors, automation, robotics and ancillary equipment as needed.Perform routine troubleshooting of assigned out of service equipment and correct issues, act as an escalation point for lower level technicians, and escalate to leadership and/or more senior technicians as needed. Record all maintenance issues in maintenance log for each line. Document all work in the computerized maintenance management system (CMMS) and ticketing systems as appropriate and maintain accurate records of all operating logs for fire pumps, generators, HVAC equipment, and other facility systems that are tested on a routine basis.Mentor all maintenance personnel in developing appropriate skillsets and knowledge of equipment.Assist maintenance mechanics in work that requires two people or when operational needs demand.Perform facility/building project work as assigned. Tasks include, but are not limited to, light bulb/ballast replacement, door repairs, furniture installation, ceiling tile replacement, carpentry duties, plaumbing repairs and maintaining operation logs.Assemble and test equipment to verify correct operation and production. Analyze and record cause of production delays on daily production reports and initiate procedures to solve equipment malfunctions. Examine defects and analyze spoilage causes and, where possible, take corrective action and verify the corrective action has eliminated the problems.Ability to certify on all industrial lift equipment. Pickers, Reaches, Skates, Booms, Scissor lifts, etc.Oversee projects as assigned. Projects will include minor space renovations, inventory management, contractor oversight, and building efficiency improvements.Oversee, inspect, and monitor the routine maintenance provided by junior engineers. Will also provide guidance and training as needed.

Basic Qualifications

Education

High school diploma or equivalent

Relevant Work Experience

5 years of experience with conveyor, automation, or robotics equipment repair and maintenance

Medline Industries, LP, and its subsidiaries, offer a competitive total rewards package, continuing education training, and tremendous potential with a growing worldwide organization.The anticipated salary range for this position is $29.50 - $41.25 per hour. This salary range is an estimate and the actual salary will vary based on applicant’s location, education, experience, skills, and abilities. Medline will not pay less than the applicable minimum wage or salary threshold.Our benefit package includes health insurance, life and disability, 401(k) contributions, paid time off, etc., for employees working 30 or more hours per week on average. For a more comprehensive list of our benefits please clickhere.For roles where employees work less than 30 hours per week, benefits include 401(k) contributions as well as access to the Employee Assistance Program, Employee Resource Groups and the Employee Service Corp.

Preferred Qualifications

Education

Associates Degree in Mechatronics, Electrical Engineering Technology, Mechanical Engineering Technology, HVAC, or equivalent.

Certification / Licensure

Graduate of an apprenticeship program or hold current trade certification.

Additional

Fundamental understanding of machinery/equipmentBasic skill level in multiple computer software packages including Microsoft ExcelExperience working with inputs, outputs, and PLC logic systems and ability to troubleshoot these systemsWilling to travel at least/up to 10% of the time for business purposes (within state and out of state).Must furnish own necessary hand tools.Must be willing to learn new equipment as it is brought on-line.Physical activities necessary to perform one or more essential functions of the position.Ability to bend, twist, reach, push, lift for extended periods dailyFrequently move, lift, carry supplies/equipment up to 50 lbs and may have to occasionally lift up to 75 lbsMust be able to stand for minimum of 8 hours and up to 12 hours for up to 6 days a weekAbility to continuously ascend and descend from ladders and stairs, work at heights and/or from a ladder, work from a lying down position, work with your hands above your head.Willing to operate material handling equipment (i.e. fork truck).Write documents and reports using writing instruments and computersRead information, often in small print (drawings)Follow appropriate safety procedures such as Lock Out/Tag Out, Arc Flash, etc. and use Personal Protective Equipment (PPE) while maintaining equipment, and ensure a safe work environment by eliminating potential equipment safety hazardsAbility to work overtime and must be available for on-call requests as needed

Disclaimer

All duties and requirements are subject to possible modification to reasonably accommodate individuals with disabilities.

This position description in no way states or implies that these are the only duties to be performed by an employee occupying this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by their supervisor(s)/manager(s).

This document does not create an employment contract, implied or otherwise, other than an "at will" employment relationship.

Preferred Qualifications

Education

Associates Degree in Mechatronics, Electrical Engineering Technology, Mechanical Engineering Technology, HVAC, or equivalent.

Certification / Licensure

Graduate of an apprenticeship program or hold current trade certification.

Additional

Fundamental understanding of machinery/equipmentBasic skill level in multiple computer software packages including Microsoft ExcelExperience working with inputs, outputs, and PLC logic systems and ability to troubleshoot these systemsWilling to travel at least/up to 10% of the time for business purposes (within state and out of state).Must furnish own necessary hand tools.Must be willing to learn new equipment as it is brought on-line.Physical activities necessary to perform one or more essential functions of the position.Ability to bend, twist, reach, push, lift for extended periods dailyFrequently move, lift, carry supplies/equipment up to 50 lbs and may have to occasionally lift up to 75 lbsMust be able to stand for minimum of 8 hours and up to 12 hours for up to 6 days a weekAbility to continuously ascend and descend from ladders and stairs, work at heights and/or from a ladder, work from a lying down position, work with your hands above your head.Willing to operate material handling equipment (i.e. fork truck).Write documents and reports using writing instruments and computersRead information, often in small print (drawings)Follow appropriate safety procedures such as Lock Out/Tag Out, Arc Flash, etc. and use Personal Protective Equipment (PPE) while maintaining equipment, and ensure a safe work environment by eliminating potential equipment safety hazardsAbility to work overtime and must be available for on-call requests as needed

Disclaimer

All duties and requirements are subject to possible modification to reasonably accommodate individuals with disabilities.

This position description in no way states or implies that these are the only duties to be performed by an employee occupying this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by their supervisor(s)/manager(s).

This document does not create an employment contract, implied or otherwise, other than an "at will" employment relationship.