Primary purpose:
• Responsible for the installation, maintenance, operation and accuracy of all natural gas and/or liquid measurement and control facilities
Essential duties and responsibilities:
• Install, inspect, test, adjust, maintain, operate, troubleshoot, repair, calibrate, and remove advanced measurement, control and regulation equipment, SCADA and quality equipment
• Detect measurement error and correct volumes as needed and provide supporting documentation
• Monitor gas and liquid product volumes through the measurement system, insure all corrections are applied and proper qualities are applied
• Interpret and apply electrical and electronic schematics pertaining to EFM and measurement electronics
• Assess all facets of assigned facilities to ensure accurate measurement and maintaining the company lost and unaccounted for gas and product with a high degree of ownership within the established corporate goals
• Perform audits of custody transfer and control data when necessary
• Responsible for the general upkeep and maintenance of all facilities and equipment as needed
• Oversee the construction and/or maintenance activities performed by third parties
• Identify, report, and correct safety and environmental concerns
• Complete appropriate documentation and paperwork
• Perform all work in compliance with Company standards, procedures, and regulatory and tariff requirements
• Demonstrate performance toward operational excellence
• Regular and predictable attendance
•Job level commensurate with experience and skill set
• Other duties as assigned
", "employmentType" : "Full Time", "educationRequirements" : "Associates Degree", "experienceRequirements" : "Less than 1 year", "industry" : [ ], "jobLocation" : [ { "@type" : "Place", "name" : "TX-DEER PARK", "address" : { "@type" : "PostalAddress", "addressLocality" : "DEER PARK", "addressRegion" : "TX", "postalCode" : "77536", "addressCountry" : "USA" } } ], "responsibilities" : "Education:
• Associates degree in a technical field, or equivalent experience
Experience / specific knowledge:
• Basic computer skills of MS Office, operating systems, company software
• Basic math skills (addition, subtraction, multiplication, division, fractions, decimals)
• Working knowledge of the National Electric Codes
• Knowledge and experience in safe handling practices of flammable gases, liquids and high pressure systems
• Knowledge with electronic test instruments
• Knowledge of gas and liquid chromatography
• Knowledge of mechanical, pneumatic, and electronic equipment used in gas and liquid product measurement and control.
• Knowledge of AGA, API, and GPA measurement standards.
Certifications, licenses, registrations:
• Possess a valid driver's license and meet company insurability requirements.
• May be required to possess a commercial driver’s license, drive a company commercial vehicle and comply with all commercial vehicle regulations.
• May be required to achieve and maintain certifications as required to perform job duties
• Required to successfully complete a background check and drug screening prior to being hired
Competencies, skills, and abilities:
• Ability to effectively organize, plan, prioritize, document, and complete work with minimum supervision
• Adequate analytical and troubleshooting skills
• Good verbal and written communication skills
• Customer focus
• Ability to work with a team, take direction from supervisors, keep required work schedules, focus attention on details, and follow work rules
• Ability to effectively communicate in the English language.
• Ability to work with others, take direction from supervisor(s), focus attention on details, and follow work rules
Physical demands:
• Must be able to withstand extreme weather conditions
• Ability to use hand tools and equipment, repetitive hand usage such as simple grasp and twisting motion included
• Physical ability to lift as much as 75lbs, bend/stoop, kneel and climb stairs/ladders
Working conditions:
• May work in low-lit areas
• Must be able to withstand extreme weather conditions
• Must be able to frequently enter confined spaces, climb to and work from elevated platforms, ladders, and walkways, etc.
• Depending upon the location and workload, travel will be required
• Available for shift work when applicable
", "baseSalary" : { "@type" : "MonetaryAmount", "currency" : "USD", "value" : { "@type" : "QuantitativeValue", "minValue" : 0.0, "maxValue" : 0.0, "unitText" : null } }, "salaryCurrency" : "USD", "workHours" : null, "url" : "https://careers.peopleclick.com/careerscp/client_kindermorgan/external/en-us/gateway.do?functionName=viewFromLink&jobPostId=86856&localeCode=en-us", "potentialAction" : { "@type" : "ApplyAction", "name" : "Measurement Technician (DEER PARK, TX)", "url" : "https://careers.peopleclick.com/careerscp/client_kindermorgan/external/en-us/gateway.do?functionName=applyFromLink&jobPostId=86856&localeCode=en-us" } } Measurement Technician (DEER PARK, TX) Job ID #: 28955 Location: TX-DEER PARK Functional Area: Misc./Trades Position Type: Full Time Experience Required: Less than 1 year Relocation Provided: No Education Required: Associates Degree RC/Department: 5503 -GPL-C-HOUSTON MEASUREMENT :KMPL var form = document.jobDetails function availableLocalesChanged() { form.functionName.value = 'renderWithNewLocale' //alert(form.action + " " + form.functionName.value) form.submit() }
Position Description
Primary purpose:
• Responsible for the installation, maintenance, operation and accuracy of all natural gas and/or liquid measurement and control facilities
Essential duties and responsibilities:
• Install, inspect, test, adjust, maintain, operate, troubleshoot, repair, calibrate, and remove advanced measurement, control and regulation equipment, SCADA and quality equipment
• Detect measurement error and correct volumes as needed and provide supporting documentation
• Monitor gas and liquid product volumes through the measurement system, insure all corrections are applied and proper qualities are applied
• Interpret and apply electrical and electronic schematics pertaining to EFM and measurement electronics
• Assess all facets of assigned facilities to ensure accurate measurement and maintaining the company lost and unaccounted for gas and product with a high degree of ownership within the established corporate goals
• Perform audits of custody transfer and control data when necessary
• Responsible for the general upkeep and maintenance of all facilities and equipment as needed
• Oversee the construction and/or maintenance activities performed by third parties
• Identify, report, and correct safety and environmental concerns
• Complete appropriate documentation and paperwork
• Perform all work in compliance with Company standards, procedures, and regulatory and tariff requirements
• Demonstrate performance toward operational excellence
• Regular and predictable attendance
•Job level commensurate with experience and skill set
• Other duties as assigned
Position Requirements
Education:
• Associates degree in a technical field, or equivalent experience
Experience / specific knowledge:
• Basic computer skills of MS Office, operating systems, company software
• Basic math skills (addition, subtraction, multiplication, division, fractions, decimals)
• Working knowledge of the National Electric Codes
• Knowledge and experience in safe handling practices of flammable gases, liquids and high pressure systems
• Knowledge with electronic test instruments
• Knowledge of gas and liquid chromatography
• Knowledge of mechanical, pneumatic, and electronic equipment used in gas and liquid product measurement and control.
• Knowledge of AGA, API, and GPA measurement standards.
Certifications, licenses, registrations:
• Possess a valid driver's license and meet company insurability requirements.
• May be required to possess a commercial driver’s license, drive a company commercial vehicle and comply with all commercial vehicle regulations.
• May be required to achieve and maintain certifications as required to perform job duties
• Required to successfully complete a background check and drug screening prior to being hired
Competencies, skills, and abilities:
• Ability to effectively organize, plan, prioritize, document, and complete work with minimum supervision
• Adequate analytical and troubleshooting skills
• Good verbal and written communication skills
• Customer focus
• Ability to work with a team, take direction from supervisors, keep required work schedules, focus attention on details, and follow work rules
• Ability to effectively communicate in the English language.
• Ability to work with others, take direction from supervisor(s), focus attention on details, and follow work rules
Physical demands:
• Must be able to withstand extreme weather conditions
• Ability to use hand tools and equipment, repetitive hand usage such as simple grasp and twisting motion included
• Physical ability to lift as much as 75lbs, bend/stoop, kneel and climb stairs/ladders
Working conditions:
• May work in low-lit areas
• Must be able to withstand extreme weather conditions
• Must be able to frequently enter confined spaces, climb to and work from elevated platforms, ladders, and walkways, etc.
• Depending upon the location and workload, travel will be required
• Available for shift work when applicable
EQUAL OPPORTUNITY EMPLOYER STATEMENT: We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class.