Stantec Buildings is on a mission to become the world’s leading integrated design practice. Our architects, engineers, interior designers, sustainability specialists, and technologists are passionate about the power of design. We take an innovative, collaborative approach to projects, sharing a common belief that sustainable design for the built environment can make the world a better place for future generations. Join us and design your place with Stantec.

Your Opportunity

As a Mechanical Engineer specializing in Vehicle Fueling Infrastructure, you will work on tasks and support projects as a team member under the guidance of a Senior Engineer or practice-area Principal, as well as collaborate with other engineers within Stantec. You will participate in the evaluation, recommendation, design, and specification of Vehicle Fueling Systems of all types – with an emphasis on hydrogen, as well as support of compressed natural gas, petroleum and HD EV charging – ensuring adherence with the client’s project parameters, verifying compliance with applicable codes and meeting engineering standards and best practices. Learning and training opportunities for new fueling technologies will be provided.

The ideal candidate will have a California mechanical-P.E. license, have experience in designing hydrogen vehicle-fueling infrastructure and other fuel types, and the ability to participate in the design-engineering efforts for such fueling-infrastructure projects. Participating in a collaborative design process, participate occasionally in business-development pursuits, and interfacing with other design disciplines inside and outside of Stantec. Candidates with a mechanical engineering degree that have the requisite experience and that have achieved EIT status or are on track for achieving EIT status will also be considered.

As your experience grows in this position, you will be encouraged to lead small and medium-sized projects within the team.

Your Key Responsibilities Provide work under the direction of the practice-area Principal or Lead Senior Engineer as outlined below. Also collaborate with and support other disciplines and operating units within Stantec as required. Mechanical PE registration in California, as well as registration with NCEES. Includes PE stamping of drawings and documents when appropriate. Some familiarity with design of gas-compressor systems, including high-speed, high-pressure (4000 PSI+) systems, and associated high-pressure piping and tubing designs, preferably compressed natural gas (CNG), as well as hydrogen. Interface with and direct a Mechanical Designer/Drafter to prepare BIM- and CAD-based construction drawings for fueling facilities and infrastructure.  Includes preparing design concepts and markups for process-piping systems in PDF format and direct Designer in preparation of plans, details, and process-flow schematics. Preferred experience with participating and offering technical inputs to HAZOP studies in hydrogen refueling. Basic knowledge of Master Format/CSI specification structure for equipment and product specifications. Strong technical- and report-writing skills, including native-equivalent proficiency in English. Preferred experience with basic electrical-power design, including preparing preliminary electrical-load schedules and conceptual single-line diagrams for 480V 800-2500A compressor-drive schemes. Preferred ability to occasionally prepare or modify drawings in Revit and/or AutoCAD, though Designer is primarily responsible for preparing drawings. Participate in QC efforts to verify design documents meet project requirements and are free of errors. Research equipment and materials needed to fulfil client and project requirements. Work with architectural, electrical, structural, civil, and other design disciplines in the coordination of facility designs. Represent the fuel-design team at inter-discipline-design meetings, including virtual and in-person meetings. Review submittals against specifications and design drawings. Research and conduct interpretations of drawings, codes, and regulations. Lead or participate in field inspections of in-process or completed project work and prepare observation reports and punch lists. Includes travel outside of Southern California three to five times per year. Perform other duties as assigned by the practice-area Principal and other senior engineering and architectural staff. Basic knowledge designing gasoline and diesel fueling systems, including underground and aboveground tank configurations, dispensers and leak-monitoring systems is a plus but not required. Your Capabilities and Credentials Thorough understanding of mechanical engineering concepts and ability to effectively communicate ideas to others in both oral and written mediums. Experience with or understanding of fluid-process systems. Familiarity with PLC-based controllers, control of actuated valves, etc. Understanding of engineering mathematics and fluid dynamics. Basic understanding of Revit and its use as a drafting/design tool; proficiency is a plus, including experience in collaborative environments using BIM360/ACC. Knowledge of AutoCAD. Basic understanding of electrical-power systems, including electrical single-line diagrams. Possess a valid driver's license and good driving record.  Education and Experience Bachelor’s degree in Mechanical Engineering State of California Mechanical-PE license Minimum 5 years’ experience working as a mechanical engineer on the design of fluid-process systems similar to those described herein is required  Experience in the oil and gas industry or in fueling-systems design is an advantage

Ability to commute to downtown Los Angeles at least two days per week is also required, or as otherwise agreed with Stantec.

Typical office environment and working in an office-based environment a majority of the time. Field work, including meetings at client locations or jobsites and other offsite work will be intermittent and may include exposure to noisy and high-pressure equipment, construction sites, and the elements including inclement weather. Appropriate PPE will be provided as needed. Offsite work may require occasional travel, expected to not exceed five trips per year, and typically one or two nights per trip. 

This description is not a comprehensive listing of activities, duties or responsibilities that may be required of the employee and other duties, responsibilities and activities may be assigned or may be changed at any time with or without notice.

Stantec is a place where the best and brightest come to build on each other’s talents, do exciting work, and make an impact on the world around us. Join us and redefine your personal best. #DesignYourPlace

Additional Information Salary Range(s): Pay transparency laws require employers to provide the following information for positions that may be in the following jurisdiction(s): Location Description: Min/Max Pay Range for postings located in CA (SF Area includes SF, SJS & WLC) Min Pay Range: CA Other Areas $104,200 Max Pay Range: CA Other Areas $151,000 Note: The final agreed upon compensation is based on individual education, qualifications, experience, and work location. At Stantec certain roles are bonus eligible.