We are a world leader in Testing, Inspection and Certification (TIC) , delivering high quality services to help clients meet the growing challenges of quality, safety, environmental protection and social responsibility.

1.1.    Position:    MECHANICAL & WELDING INSPECTOR
1.2.    Office:     Tabuk, Neom
1.3.    Reporting to:    Project Manager / Director
1.4.    Key Working Relationship    Project manager, project Coordinator, Site Coordinator, Teammates, Team Leader, and Client.

2.1.    Education:    Engineering Degree/ Diploma
2.2.    Skills:    Inspection - Reporting – Communication - Internet & Microsoft Office.
2.3.    Technical knowledge:

 Inspector shall be certified as an American Welding Society (AWS) CWI, CSWIP 3.2 Certified Welding Inspector, or NGHC approved equivalent.   Inspector shall have a demonstrated background and thorough knowledge of codes such as American National Standards Institute (ANSI) B 31.3, 31.4 and 31.8, ASME Section V and IX, API 510, 570, 620 and 650, AWS D1.1, required for the execution of the WORK.   He must be NACE Corrosion Certified Technologist. 

2.4.    Experience

 Minimum 5 years of experience in the industrial, energy and power projects.

3.1.    Primary Functions    

 Mechanical & Welding Inspector will be responsible for update, assessment, and analysis of inspection and integrity management activities. Shall be able to perform a variety of complex functions with minimal supervision.

3.2.    Technical Expertise

 Mechanical & Welding Inspector must have an Engineering degree or diploma in Mechanical/Metallurgical discipline with a minimum of 4 years experience in the industrial, energy and power projects inspection.   shall be able to perform all types of equipment/ piping inspection that require the use of calipers, micrometers, infrared camera, borescope, pit gauges, etc., to ensure continued safe operation; tests and inspections on equipment that has been repaired or modified to assure that the equipment is suitable for intended service.   Must be familiar with relevant API standards such as API510/570/653/598/572/576 etc.   Inspectors must be able to prepare inspection reports & provide recommendations after inspections.

3.3.    HSE Requirements    

 Always comply with all applicable legal requirements, BV HSE Policies, procedures, and practices.   Maintain personal work areas tidy, hazard free and report any deviation/fault/hazard immediately to the location manager/line manager/HSE Representative  Report immediately to HSE Representative any newly identified hazard and participate in devising suitable operational control to eliminate/minimize the pertinent risk.  Report immediately to HSE Representative any HSE near miss, incident and cooperate in the investigation  Report all incidents, near misses and take action whenever encounter unsafe act or condition   Take care of your own health and safety and that of people who may be affected by what you do (or do not do).   Co-operate with others on health and safety, do not interfere with, or misuse, anything provided for your health, safety, or welfare.

 

 

SHAPING A WORLD OF TRUST - WHAT WE VALUE AT BV

 

We create trust between businesses and we are committed to cultivating an open and inclusive environment wherever we operate and so do our employees. Being part of the BV family is more than just working, it’s being convinced that you will leave your mark…. in shaping a world of trust.