Metrology / Calibration Technician
Lockheed Martin
Job ID: 685953BR Date posted: Feb. 05, 2025
Description:Responsible for the calibration and repair of all types of test, measurement and diagnostic equipment (TMDE).
Requires sound knowledge of precision measurement methodologies and principles.
Candidate will have responsibility for electrical and dimensional calibrations including, but not limited to; length, force, flow, pressure, mass, torque, temperature, humidity, vibration, voltage, current, resistance, RF power, and frequency.
Must have an understanding of measurement traceability and be competent interpreting and converting specifications.
Must be familiar with metrological/calibration quality requirements and have the ability to create detailed electronic records of work performed.
Must be capable of using manuals, schematics, or blueprints to perform component level troubleshooting and repair. Must be familiar with laboratory safety requirements.
Basic Qualifications:
Experience with the use of precision measuring principles, theories and units of measure International System of Units (SI Units).
Experience as a calibration technician actually performing calibration/repair of test & measurement equipment.
Experience with laboratory safety and quality practices.
Experience with calibrating equipment in accordance with industry standards, such as ISO 9001, AS9100, ANSI Z540.1, or equivalent.
Desired Skills:
An understanding of RF calibration with proficiency using with RF test equipment like signal generators, spectrum analyzers, power meters.
Familiarity with relevant industry standards (e.g., IEEE, IEC), excellent attention to detail, strong analytical abilities, and the ability to troubleshoot complex RF circuits and systems.
Familiarity with dimensional measuring instruments, understanding of geometric tolerances, ability to read blueprints and technical drawings, knowledge of statistical analysis.
Experience with dimensional calibration equipment (micrometers, calipers, height gauges), familiarity with relevant industry standards, and strong attention to detail; ensuring accurate measurements of an object's dimensions within specified tolerances.
Clearance Level: None
Other Important Information You Should Know
Expression of Interest: By applying to this job, you are expressing interest in this position and could be considered for other career opportunities where similar skills and requirements have been identified as a match. Should this match be identified you may be contacted for this and future openings.
Ability to Work Remotely: Onsite Full-time: The work associated with this position will be performed onsite at a designated Lockheed Martin facility.
Work Schedules: Lockheed Martin supports a variety of alternate work schedules that provide additional flexibility to our employees. Schedules range from standard 40 hours over a five day work week while others may be condensed. These condensed schedules provide employees with additional time away from the office and are in addition to our Paid Time off benefits.
Schedule for this Position: Standard Monday to Friday 40 hour work week
Lockheed Martin is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.
The application window will close in 90 days; applicants are encouraged to apply within 5 - 30 days of the requisition posting date in order to receive optimal consideration.
Join us at Lockheed Martin, where your mission is ours. Our customers tackle the hardest missions. Those that demand extraordinary amounts of courage, resilience and precision. They’re dangerous. Critical. Sometimes they even provide an opportunity to change the world and save lives. Those are the missions we care about.
As a leading technology innovation company, Lockheed Martin’s vast team works with partners around the world to bring proven performance to our customers’ toughest challenges. Lockheed Martin has employees based in many states throughout the U.S., and Internationally, with business locations in many nations and territories.
Experience Level: Hourly/Non-Exempt
Business Unit: AERONAUTICS COMPANY
Relocation Available: No
Career Area: QA/Test and Inspection
Type: Full-Time
Shift: First
Description:Responsible for the calibration and repair of all types of test, measurement and diagnostic equipment (TMDE).
Requires sound knowledge of precision measurement methodologies and principles.
Candidate will have responsibility for electrical and dimensional calibrations including, but not limited to; length, force, flow, pressure, mass, torque, temperature, humidity, vibration, voltage, current, resistance, RF power, and frequency.
Must have an understanding of measurement traceability and be competent interpreting and converting specifications.
Must be familiar with metrological/calibration quality requirements and have the ability to create detailed electronic records of work performed.
Must be capable of using manuals, schematics, or blueprints to perform component level troubleshooting and repair. Must be familiar with laboratory safety requirements.
Basic Qualifications:
Experience with the use of precision measuring principles, theories and units of measure International System of Units (SI Units).
Experience as a calibration technician actually performing calibration/repair of test & measurement equipment.
Experience with laboratory safety and quality practices.
Experience with calibrating equipment in accordance with industry standards, such as ISO 9001, AS9100, ANSI Z540.1, or equivalent.
Desired Skills:
An understanding of RF calibration with proficiency using with RF test equipment like signal generators, spectrum analyzers, power meters.
Familiarity with relevant industry standards (e.g., IEEE, IEC), excellent attention to detail, strong analytical abilities, and the ability to troubleshoot complex RF circuits and systems.
Familiarity with dimensional measuring instruments, understanding of geometric tolerances, ability to read blueprints and technical drawings, knowledge of statistical analysis.
Experience with dimensional calibration equipment (micrometers, calipers, height gauges), familiarity with relevant industry standards, and strong attention to detail; ensuring accurate measurements of an object's dimensions within specified tolerances.
Clearance Level: None
Other Important Information You Should Know
Expression of Interest: By applying to this job, you are expressing interest in this position and could be considered for other career opportunities where similar skills and requirements have been identified as a match. Should this match be identified you may be contacted for this and future openings.
Ability to Work Remotely: Onsite Full-time: The work associated with this position will be performed onsite at a designated Lockheed Martin facility.
Work Schedules: Lockheed Martin supports a variety of alternate work schedules that provide additional flexibility to our employees. Schedules range from standard 40 hours over a five day work week while others may be condensed. These condensed schedules provide employees with additional time away from the office and are in addition to our Paid Time off benefits.
Schedule for this Position: Standard Monday to Friday 40 hour work week
Lockheed Martin is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.
The application window will close in 90 days; applicants are encouraged to apply within 5 - 30 days of the requisition posting date in order to receive optimal consideration.
Join us at Lockheed Martin, where your mission is ours. Our customers tackle the hardest missions. Those that demand extraordinary amounts of courage, resilience and precision. They’re dangerous. Critical. Sometimes they even provide an opportunity to change the world and save lives. Those are the missions we care about.
As a leading technology innovation company, Lockheed Martin’s vast team works with partners around the world to bring proven performance to our customers’ toughest challenges. Lockheed Martin has employees based in many states throughout the U.S., and Internationally, with business locations in many nations and territories.
Experience Level: Hourly/Non-Exempt
Business Unit: AERONAUTICS COMPANY
Relocation Available: No
Career Area: QA/Test and Inspection
Type: Full-Time
Shift: First
Confirm your E-mail: Send Email
All Jobs from Lockheed Martin