carton according to customer specification sheet and company policies. The position incumbent
trims and assembles golf bags from component parts and tanks from the blow molding machine
ensuring all quality standards are met. Operators move into different job assignments throughout ... the shift. Changing assignments with variable periodically on the machinery and equipment
according to the requirements for a smooth production flow.
Responsibilities:
1. Check machine readings from air pressure, gauges and record data on machine record
sheets.
2. Check products with visual aid and manual gauging per Operation Procedures.
3. Load and unload products from machines.
4. Verifies with the documentation on the production line to determine required assembly,
exterior finish on product, and any special requirements.
5. Checks stock bins for adequate supplies of sub-assemblies, parts, and fasteners for the
particular production part. Check for designated carton pack and labeling. Notifies the
Supervisor if shortage exists or incorrect parts are in bins.
6. Uses some precision hand tools and small power tools (electric screwdrivers, calipers,
gauges, rivet machines, etc.) along with loading automated machines.
7. Checks operating controls and safety stops on machine. Checks power and hand tools for
correct operation.
8. Packs finished product into designated carton for shipment to customers.
9. Complete all documentation required for the processes where working.
10. Performs duties which require lifting, moving, loading and unloading material with pallet
jack or forklift.
11. Requires excellent housekeeping skills by maintaining work area in a clean and orderly
condition.
12. Control the automated process and temperature for making products.
13. Check the quality of the prepared product and document the exact results at definite times
of production process.
14. Trimming flashing from the plastic fuel tank.
15. Attach subcomponents to the product.
16. Notify supervisor regarding excessive number of defective or damaged parts.
17. Participate in group meetings to exchange any job-related information.
18. Ensure compliance with all corporate policies and the Occupational Safety and Health
Administration (OSHA) rules while conducting work functions.
19. Wear required approved company uniform and required personal protective equipment.
20. Support and comply with all company policies, procedures, standards (6S, SHEMS, etc.),
through compliance, improvement and preventive measures.
21. Perform related tasks as needed.
Working hours: 12:00 AM - 8:30 AM
Skills:
Previous industrial manufacturing experience preferred but not required.
Education:
High School
Experience:
0-1 years
Qualifications:
High school diploma from an accredited institution or GED required.
Qualifications:
1. Good communication skills
2. Ability to understand quality control methods
3. Ability to use various machines and practical skills
4. Able to follow and execute instructions
5. Physical ability to stand for a long time
6. Should have excellent hand-eye coordination
7. Ability to operate various assembly tools
8. Sufficient physical reflexes and personal mobility
9. Good clarity of hearing and speech
please submit updated resume to www.spherion.com/gainesville
Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion.
Equal Opportunity Employer: Race, Color, Religion, Sex, Sexual Orientation, Gender Identity, National Origin, Age, Genetic Information, Disability, Protected Veteran Status, or any other legally protected group status.
At Spherion, we welcome people of all abilities and want to ensure that our hiring and interview process meets the needs of all applicants. If you require a reasonable accommodation to make your application or interview experience a great one, please contact Callcenter@spherion.com.
Pay offered to a successful candidate will be based on several factors including the candidate's education, work experience, work location, specific job duties, certifications, etc. In addition, Spherion offers a comprehensive benefits package, including health, and an incentive and recognition program (all benefits are based on eligibility).
carton according to customer specification sheet and company policies. The position incumbent
trims and assembles golf bags from component parts and tanks from the blow molding machine
ensuring all quality standards are met. Operators move into different job assignments throughout
the shift. Changing assignments with variable periodically on the machinery and equipment
according to the requirements for a smooth production flow.
Responsibilities:
1. Check machine readings from air pressure, gauges and record data on machine record
sheets.
2. Check products with visual aid and manual gauging per Operation Procedures.
3. Load and unload products from machines.
4. Verifies with the documentation on the production line to determine required assembly,
exterior finish on product, and any special requirements.
5. Checks stock bins for adequate supplies of sub-assemblies, parts, and fasteners for the
particular production part. Check for designated carton pack and labeling. Notifies the
Supervisor if shortage exists or incorrect parts are in bins. ... 6. Uses some precision hand tools and small power tools (electric screwdrivers, calipers,
gauges, rivet machines, etc.) along with loading automated machines.
7. Checks operating controls and safety stops on machine. Checks power and hand tools for
correct operation.
8. Packs finished product into designated carton for shipment to customers.
9. Complete all documentation required for the processes where working.
10. Performs duties which require lifting, moving, loading and unloading material with pallet
jack or forklift.
11. Requires excellent housekeeping skills by maintaining work area in a clean and orderly
condition.
12. Control the automated process and temperature for making products.
13. Check the quality of the prepared product and document the exact results at definite times
of production process.
14. Trimming flashing from the plastic fuel tank.
15. Attach subcomponents to the product.
16. Notify supervisor regarding excessive number of defective or damaged parts.
17. Participate in group meetings to exchange any job-related information.
18. Ensure compliance with all corporate policies and the Occupational Safety and Health
Administration (OSHA) rules while conducting work functions.
19. Wear required approved company uniform and required personal protective equipment.
20. Support and comply with all company policies, procedures, standards (6S, SHEMS, etc.),
through compliance, improvement and preventive measures.
21. Perform related tasks as needed.
Working hours: 12:00 AM - 8:30 AM
Skills:
Previous industrial manufacturing experience preferred but not required.
Education:
High School
Experience:
0-1 years
Qualifications:
High school diploma from an accredited institution or GED required.
Qualifications:
1. Good communication skills
2. Ability to understand quality control methods
3. Ability to use various machines and practical skills
4. Able to follow and execute instructions
5. Physical ability to stand for a long time
6. Should have excellent hand-eye coordination
7. Ability to operate various assembly tools
8. Sufficient physical reflexes and personal mobility
9. Good clarity of hearing and speech
please submit updated resume to www.spherion.com/gainesville
Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion.
Equal Opportunity Employer: Race, Color, Religion, Sex, Sexual Orientation, Gender Identity, National Origin, Age, Genetic Information, Disability, Protected Veteran Status, or any other legally protected group status.
At Spherion, we welcome people of all abilities and want to ensure that our hiring and interview process meets the needs of all applicants. If you require a reasonable accommodation to make your application or interview experience a great one, please contact Callcenter@spherion.com.
Pay offered to a successful candidate will be based on several factors including the candidate's education, work experience, work location, specific job duties, certifications, etc. In addition, Spherion offers a comprehensive benefits package, including health, and an incentive and recognition program (all benefits are based on eligibility).
1. Check machine readings from air pressure, gauges and record data on machine recordsheets.2. Check products with visual aid and manual gauging per Operation Procedures.3. Load and unload products from machines.4. Verifies with the documentation on the production line to determine required assembly,exterior finish on product, and any special requirements.5. Checks stock bins for adequate supplies of sub-assemblies, parts, and fasteners for theparticular production part. Check for designated carton pack and labeling. Notifies theSupervisor if shortage exists or incorrect parts are in bins.6. Uses some precision hand tools and small power tools (electric screwdrivers, calipers,gauges, rivet machines, etc.) along with loading automated machines.7. Checks operating controls and safety stops on machine. Checks power and hand tools forcorrect operation.8. Packs finished product into designated carton for shipment to customers.9. Complete all documentation required for the processes where working.10. Performs duties which require lifting, moving, loading and unloading material with palletjack or forklift.11. Requires excellent housekeeping skills by maintaining work area in a clean and orderlycondition.12. Control the automated process and temperature for making products.13. Check the quality of the prepared product and document the exact results at definite timesof production process.14. Trimming flashing from the plastic fuel tank.15. Attach subcomponents to the product.16. Notify supervisor regarding excessive number of defective or damaged parts.17. Participate in group meetings to exchange any job-related information.18. Ensure compliance with all corporate policies and the Occupational Safety and HealthAdministration (OSHA) rules while conducting work functions.19. Wear required approved company uniform and required personal protective equipment.20. Support and comply with all company policies, procedures, standards (6S, SHEMS, etc.),through compliance, improvement and preventive measures.21. Perform related tasks as needed.
experience0-1 years
skillsPrevious industrial manufacturing experience preferred but not required.
qualificationsHigh school diploma from an accredited institution or GED required.Qualifications:1. Good communication skills2. Ability to understand quality control methods3. Ability to use various machines and practical skills4. Able to follow and execute instructions5. Physical ability to stand for a long time6. Should have excellent hand-eye coordination7. Ability to operate various assembly tools8. Sufficient physical reflexes and personal mobility9. Good clarity of hearing and speech
educationHigh School
share this job.