Job details

Various Shifts available
1 st shift 7:00AM - 3:30PM (Monday -Friday)
2 nd shift 3:30PM - 12AM (Monday - Friday)
3 rd shift 10:30PM - 7:00AM (Sunday-Thursday); Overtime as required


Perform quality inspection on specialised assemblies and fabircations for a wide variety of applications including defense, aerospace, aircraft systems and components, turbines, medical devices and systems, and industrial processing and fluid control. ...
Responsibilities:
Inspect product using standard inspection tools (calipers, micrometers, height gage, etc.).
Read and understand industrial / aerospace specifications including ISO9001 and AS9100, military specifications, industry specifications, and manufacturing instructions.
Perform inspections and record inspection data associated with First Piece Inspections, First Article Inspections, Receiving Inspections, Final Inspections, and Work-in-Process Inspections.
Complete accurate first article packages for submission to Engineering and Quality personnel.
Ensure nonconforming material is properly segregated according to procedures and controlled until properly dispositioned.
Assist in maintaining inspection equipment to ensure calibration is performed in a timely manner, and that lost, damaged or out-of-service equipment is properly accounted for and controlled according to procedure.
Perform all tasks in a safe and reasonable manner per Shapes Employee Handbook.
Maintain a clean safe work environment and contribute to Shapes 6S program and Lean Manufacturing concepts.
Complete documentation accurately and scan on/off shop orders correctly.
Utilize and understand operation process sheets and inspect parts per character control sheets.
Notify Supervisor immediately should there be damage, defect, or inability to proceed efficiently.
Set up and operate CMM and inspection arm using pre-existing inspection programs.
Verify and validate CMM and inspection arm programs including correlation using secondary inspection methods.
Assist junior inspection personnel in inspection methodology.
Perform complex layout inspections (datum setups, multiple characteristics, and mathematical calculations) as required.
Address manufacturing / inspection challenges with shop personnel and work with Engineering to implement solutions.
Qualify and become certified for customer designated quality representative (DQR) status as required.
Perform other related duties as required.

Working hours: Various Shifts Available

Skills:
--Written and verbal communication skills required.
--Ability to work independently or in a team environment.
--Ability to stay focused, adapt to change positively or negatively, and close attention to detail.
--Ability to read and follow company processes, policies, and procedures.
--Must have knowledge and understanding of basic math and computer functions.
--Ability to multitask, work effectively and efficiently to shop order standards.
--Must understand engineering drawings, schematic diagrams, or formulas and confers with management or engineering staff to determine quality and reliability standards.
--Must be willing to train co-workers in aspects of the shop.
--Must be able to communicate and read English proficiently

Education:
Associate

Experience:
4-7 years

Qualifications:
Minimum technical school / 3 years of work experience in Quality field; or 5 years work experience in Quality field


If you have what we are looking for apply today at https://www.spherion.com/our-offices/melbourne_1222/
MUST INCLUDE A FULL DETAILED RESUME WITH WORK HISTORY FOR AT LEAST THE LAST 7 YEARS

Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion.

Equal Opportunity Employer: Race, Color, Religion, Sex, Sexual Orientation, Gender Identity, National Origin, Age, Genetic Information, Disability, Protected Veteran Status, or any other legally protected group status.

At Spherion, we welcome people of all abilities and want to ensure that our hiring and interview process meets the needs of all applicants. If you require a reasonable accommodation to make your application or interview experience a great one, please contact Callcenter@spherion.com.

Pay offered to a successful candidate will be based on several factors including the candidate's education, work experience, work location, specific job duties, certifications, etc. In addition, Spherion offers a comprehensive benefits package, including health, and an incentive and recognition program (all benefits are based on eligibility).

Show lessShow more

Various Shifts available
1 st shift 7:00AM - 3:30PM (Monday -Friday)
2 nd shift 3:30PM - 12AM (Monday - Friday)
3 rd shift 10:30PM - 7:00AM (Sunday-Thursday); Overtime as required


Perform quality inspection on specialised assemblies and fabircations for a wide variety of applications including defense, aerospace, aircraft systems and components, turbines, medical devices and systems, and industrial processing and fluid control.

Responsibilities:
Inspect product using standard inspection tools (calipers, micrometers, height gage, etc.).
Read and understand industrial / aerospace specifications including ISO9001 and AS9100, military specifications, industry specifications, and manufacturing instructions.
Perform inspections and record inspection data associated with First Piece Inspections, First Article Inspections, Receiving Inspections, Final Inspections, and Work-in-Process Inspections.
Complete accurate first article packages for submission to Engineering and Quality personnel.
Ensure nonconforming material is properly segregated according to procedures and controlled until properly dispositioned. ... Assist in maintaining inspection equipment to ensure calibration is performed in a timely manner, and that lost, damaged or out-of-service equipment is properly accounted for and controlled according to procedure.
Perform all tasks in a safe and reasonable manner per Shapes Employee Handbook.
Maintain a clean safe work environment and contribute to Shapes 6S program and Lean Manufacturing concepts.
Complete documentation accurately and scan on/off shop orders correctly.
Utilize and understand operation process sheets and inspect parts per character control sheets.
Notify Supervisor immediately should there be damage, defect, or inability to proceed efficiently.
Set up and operate CMM and inspection arm using pre-existing inspection programs.
Verify and validate CMM and inspection arm programs including correlation using secondary inspection methods.
Assist junior inspection personnel in inspection methodology.
Perform complex layout inspections (datum setups, multiple characteristics, and mathematical calculations) as required.
Address manufacturing / inspection challenges with shop personnel and work with Engineering to implement solutions.
Qualify and become certified for customer designated quality representative (DQR) status as required.
Perform other related duties as required.

Working hours: Various Shifts Available

Skills:
--Written and verbal communication skills required.
--Ability to work independently or in a team environment.
--Ability to stay focused, adapt to change positively or negatively, and close attention to detail.
--Ability to read and follow company processes, policies, and procedures.
--Must have knowledge and understanding of basic math and computer functions.
--Ability to multitask, work effectively and efficiently to shop order standards.
--Must understand engineering drawings, schematic diagrams, or formulas and confers with management or engineering staff to determine quality and reliability standards.
--Must be willing to train co-workers in aspects of the shop.
--Must be able to communicate and read English proficiently

Education:
Associate

Experience:
4-7 years

Qualifications:
Minimum technical school / 3 years of work experience in Quality field; or 5 years work experience in Quality field


If you have what we are looking for apply today at https://www.spherion.com/our-offices/melbourne_1222/
MUST INCLUDE A FULL DETAILED RESUME WITH WORK HISTORY FOR AT LEAST THE LAST 7 YEARS

Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion.

Equal Opportunity Employer: Race, Color, Religion, Sex, Sexual Orientation, Gender Identity, National Origin, Age, Genetic Information, Disability, Protected Veteran Status, or any other legally protected group status.

At Spherion, we welcome people of all abilities and want to ensure that our hiring and interview process meets the needs of all applicants. If you require a reasonable accommodation to make your application or interview experience a great one, please contact Callcenter@spherion.com.

Pay offered to a successful candidate will be based on several factors including the candidate's education, work experience, work location, specific job duties, certifications, etc. In addition, Spherion offers a comprehensive benefits package, including health, and an incentive and recognition program (all benefits are based on eligibility).

Show lessShow morekey responsibilities

Inspect product using standard inspection tools (calipers, micrometers, height gage, etc.).Read and understand industrial / aerospace specifications including ISO9001 and AS9100, military specifications, industry specifications, and manufacturing instructions.Perform inspections and record inspection data associated with First Piece Inspections, First Article Inspections, Receiving Inspections, Final Inspections, and Work-in-Process Inspections.Complete accurate first article packages for submission to Engineering and Quality personnel.Ensure nonconforming material is properly segregated according to procedures and controlled until properly dispositioned.Assist in maintaining inspection equipment to ensure calibration is performed in a timely manner, and that lost, damaged or out-of-service equipment is properly accounted for and controlled according to procedure.Perform all tasks in a safe and reasonable manner per Shapes Employee Handbook.Maintain a clean safe work environment and contribute to Shapes 6S program and Lean Manufacturing concepts.Complete documentation accurately and scan on/off shop orders correctly.Utilize and understand operation process sheets and inspect parts per character control sheets.Notify Supervisor immediately should there be damage, defect, or inability to proceed efficiently. Set up and operate CMM and inspection arm using pre-existing inspection programs. Verify and validate CMM and inspection arm programs including correlation using secondary inspection methods.Assist junior inspection personnel in inspection methodology.Perform complex layout inspections (datum setups, multiple characteristics, and mathematical calculations) as required.Address manufacturing / inspection challenges with shop personnel and work with Engineering to implement solutions.Qualify and become certified for customer designated quality representative (DQR) status as required.Perform other related duties as required.

experience

4-7 years

skills

--Written and verbal communication skills required.--Ability to work independently or in a team environment.--Ability to stay focused, adapt to change positively or negatively, and close attention to detail.--Ability to read and follow company processes, policies, and procedures.--Must have knowledge and understanding of basic math and computer functions.--Ability to multitask, work effectively and efficiently to shop order standards.--Must understand engineering drawings, schematic diagrams, or formulas and confers with management or engineering staff to determine quality and reliability standards.--Must be willing to train co-workers in aspects of the shop.--Must be able to communicate and read English proficiently

qualifications

Minimum technical school / 3 years of work experience in Quality field; or 5 years work experience in Quality field

education

Associate