Summary This National Guard position is for a SHEET METAL MECHANIC (AIRCRAFT), Position Description Number D1371000 and is part of the Oregon Air National Guard 142d Wing, National Guard. Responsibilities As a SHEET METAL MECHANIC (AIRCRAFT), WG-3806-10, this position is located within a National Guard aircraft maintenance organization. Its primary purpose is to accomplish the inspection, repair, modification, installation and troubleshooting of sheet metal, fiberglass, bonded honeycomb and other structural materials and components as well as treatment (i.e., mechanical and chemical), and painting of missiles, aircraft powered and non-powered Aerospace Ground Equipment (AGE), and monitoring aircraft and equipment washing. (1) Independently inspects aircraft and determines the nature and extent of repairs to be made, using applicable technical orders as guidelines. Works directly on the aircraft and its components, fulfilling such tasks as removal, repair, modification and installation of parts and assemblies, such as frames, stringers, longerons, bulkheads, beams, ribs, spars, skin, cowling, brackets, faring, access doors, panels and other related items. May be required to clear red "X" conditions. (2) Repairs cracks in aircraft skin. Fabricates and fits patches to damaged areas, determining repair detail necessary to retain or restore original strength. Fits and trims components to aircraft such as landing gear doors, control surfaces, flaps access doors and other assemblies. Seals structures to make them pressure, water and weather tight. (3) Troubleshoots aircraft structural repair situations in such areas as fuselage, tails, wings, cowlings, and stabilizers. Removes, forms, fits, and installs highly stressed and double contoured skins, using hand or powered drilling and cutting tools and other metal working equipment. Determines shear and bearing load factors during rivet replacement. Installs heads up, regular, heat treated, high shear, and blind type aircraft rivets and fasteners, using pneumatic riveters, special tools and bucking bars. Removes damaged or broken fasteners and receptacles. (4) Aligns and balances component structures and airframe using precision measuring instruments and levels. Performs metal to metal bonding where delimitation of surfaces and core material occurs in control surfaces. (5) Inspects damage or deterioration and determines repair or replacement of plastic, fiberglass, composites, bonded structures, and bonded honeycomb assemblies using powered and non-powered tools and equipment. Repairs or replaces retaining frames and installs plastic laminated blanks. Designs and constructs forming fixtures. (6) Manufactures and ensures that metal tubing, conduits and cables are fabricated and tested in accordance with drawings and specifications. Fabricates and repairs flexible control cables. (7) Performs fabrication of local manufactured items requited for aircraft and equipment. Work includes layout, bending, cutting, forming and assembling. Devise and calculates patterns employing the principles of triangulation, radial and parallel line development. (8) Sets up and operates power shears, brakes, rolls, dimpling machines, drill presses, saws, portable powered tools, specific detection and measuring equipment, and other metal working equipment, including use of other tools of the trade. Requisitions necessary supplies and equipment for the activity. (9) Prepares and designs layout, dies, jigs, and templates necessary to carry out fabrication repair or modification of aircraft, engine, AGE, and other equipment. Works from blueprints, technical orders diagrams, and work orders. (10) Identifies metal corrosion. Performs necessary testing to identify type corrosion present by examination with magnifying equipment, chemical and mechanical methods and treats aircraft engines, in accordance with applicable technical publications. Ensures that work assignments received from supervisor or maintenance control are accomplished in a timely manner. (11) Removes corrosion by mechanical and chemical procedures to include use of portable powered (electric and pneumatic) sanders, buffers, brushes, bead blasters, vacuum cleaners, scrapers, grinders, acids, caustics, solvents, alcohols and other agents used in corrosion control processes. Treats metal with chemical procedures, such as acids and caustics for passivation and etching, to protect metal from oxidation. Performs such functions as pickling of metals to prepare for good bonding with primer coat of protective materials. (12) Applies protective coatings, markings, and decals after proper removal of corrosion and treatment of metals. Uses conventional paint spray equipment, electrostatic spray equipment, brushes and special applicators when applying primers and surface coatings. (13) Performs other duties as assigned. *The above description only mentions a limited amount of the position's official duties. For a full comprehensive document that covers all the duties of the position, please contact one of the Recruitment Specialists at the bottom of the announcement. Requirements Conditions of Employment Qualifications Areas of Consideration: Area 1 - Current permanent and indefinite T32 technicians of the Oregon ANG. Area 2 - Current permanent and indefinite T5 employees of the Oregon ANG. Area 3 - Current service members in the Oregon ANG. Area 4 - Individuals in the active duty US Air Force, Air Force Reserve, or Air National Guard. Area 5 - US Citizens eligible to meet the military requirements for membership in the Oregon ANG. GENERAL and SPECIALIZED EXPERIENCE QUALIFICATION REQUIREMENTS: Work involves the fabrication, modification, repair, assembly, and installation of sheet metal parts, items, and assemblies. Metals include but are not restricted to galvanized and black iron, aluminum and aluminum alloys, stainless steel, copper, and brass sheets, lead alloys and bronze. Experience or training that has provided the candidate with the ability to plan, manufacture, and install cylindrical, square, or rectangular-shaped objects that have easily constructed fastenings such as single and double-hem edges and single, double or grooved seams. Must have at least 18 months of experience or training in planning, layout, and construction skills to manufacture items and systems with dovetailed seams, set-in-bottom seams, burred-bottom seams, or wired or lock seams. Experience using more complicated shop tools and equipment. Experience in using metals including stainless steel, copper sheet, magnesium, honeycomb material and alloys. Experience demonstrating the use of more complicated mathematical calculations and complicated measuring instruments. Education Additional Information Application Instructions for Current AGR members (Oregon ANG only) intending to remain AGR must submit the following: 1) NGB Form 34-1, Application for Active Guard/Reserve (AGR) - Position Announcement number and position title must be annotated on this form. 2) Current Report of Individual Personnel (RIP) - In lieu of a RIP, applicant may provide a printout from the Virtual MPF (VMPF). Documents must show your ASVAB scores. 3) Copy of current physical fitness assessment. 4) AF Form 422, Notification of Air Force Member's Qualification Status. For cross training opportunities (refer to Conditions of Employment above), AGR applicants should reference the qualifications needed to enter the AFSC being hired for described in the current Air Force Enlisted or Officer Classification Directory. Complete application packet should be in a single PDF format document with the Announcement Number and Last Name ONLY as the file name (example: OR-AF-24-0XX Last name) Please email completed packages to the personnel listed below. Please include the complete announcement number and last name in the subject line. The following applies to Bargaining Unit Positions: Bargaining unit positions within the Oregon National Guard that are represented by AFGE, local 2986 (AFL-CIO). If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency (https://www.sss.gov/RegVer/wfRegistration.aspx).