supplier quality engineer
Belcan
Job Title: Supplier Quality Engineer
Location: Forest, OH
Zip Code: 45843
Start Date: ASAP
Job Type: Direct Hire
Pay Rate: $71,500-$107,300/salary DoE
Schedule:
Keywords: #QualityEngineer #EngineeringJobs
JOB RESPONSIBILITIES:
* Develops, implements, and follows up on root cause and corrective actions (RCCA) in response to product rejected in house and product rejected by customers and supplier rejections.
* Perform supplier audits as needed.
* Host customer and regulatory agencies audits. (Federal Aviation Administration, AS9100 registrar, etc.).
* Develops, implements, and follows up on RCCA for findings resulting from these audits.
* Performs Over Inspection as a Designated Supplier Quality Representative (DSQR) by performing dimensional inspections, reviewing documentation, reviewing test data and Material Review Board (MRB) dispositions; submitting data by method specified by customer (website, etc.), operating scanning equipment for 2D marking, et
* Reviews and interprets customer Quality Requirements to develop and implement systems as needed to ensure compliance.
* Manages First Article Inspection (FAI).
* Provides methods and tooling for inspection; obtains certifications from suppliers and writes FAI reports in accordance with AS9102.
* Maintaining the Supplier portal.
* Monitor Supplier performance metrics and take appropriate measures when metrics are not met.
* Point of contact for all Suppliers.
REQUIRED QUALIFICATIONS:
* 2-3+ years of relevant work experience
* Experience working with suppliers, reviewing data, auditing
* Practical knowledge of state-of-the-art inspection and quality engineering/assurance techniques, procedures, instruments, equipment, theories, principles and concepts and general business operations.
* Practical knowledge of Quality Assurance analysis tools (Six Sigma, FAI, PPAP, APQP, PFMEA, 8D, Fishbone).
* Knowledge of aerospace industry or similar industry products and legal and regulatory requirements related to field.
* Ability to effectively apply continuous improvement principles and techniques to quality and manufacturing functions.
* Ability to use standard business software applications and/or specialized data analysis tools.
* Ability to work on a variety of problems of moderate scope and complexity where detail analysis of the data is required.
* Ability to read, analyze, and interpret drawings, specifications. Ability to use standard manual inspection tools (surface plate & height gage; vernier calipers & micrometers; plug & thread gages, etc.).
* Ability to effectively communicate and present information to suppliers, team members, team leaders and top management; respond to significant inquiries or complaints from customers, regulatory agencies.
* Ability to interpret a broad variety of technical instructions in mathematical or diagram form that include several abstract and concrete variables.
* Ability to define problems, collect data, establish facts, and draw valid conclusions.
* Ability to use full discretion in selecting procedures and techniques to apply to work and determine priority and order of assignments.
* Ability to effectively demonstrate team member competencies and participate in goal-setting, performance feedback, and self-development activities.
PREFERRED QUALIFICATIONS:
* Associates Degree in Engineering Technology required. Bachelor of Science (4 year) degree in an Engineering major is preferred.
* Working knowledge of Geometric Dimensioning and Tolerancing (GD&T) and ASME Y14.5 preferred but not required.
* Experience developing, implementing and troubleshooting alternate inspection methods preferred but not required.
* Experience in developing and implementing Root Cause and Corrective Action (RCCA) preferred.
* Working knowledge of the ISO Quality Standard preferred.
* Demonstrated ability to use standard manual inspection tools (surface plate & height gage; vernier calipers & micrometers; plug gages; thread gages etc.) preferred.
* Experience as a Designated Supplier Quality Representative (DSQR) for one or more major aerospace contractors (General Electric, Pratt & Whitney, Lockheed, etc.) preferred.
* TTS will provide training and certification as required.
* Experience authorizing dispositions as a member of a Material Review Board preferred.
* Demonstrated experience writing First Article Inspection (FAI) reports preferred.
If you are interested in this role, please apply via the apply now link provided. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract, temporary, temp-to-hire, and direct assignments. We are the employer of choice for thousands worldwide. For more information, please visit our website at Belcan.com
EOE/F/M/Disability/Veterans
Location: Forest, OH
Zip Code: 45843
Start Date: ASAP
Job Type: Direct Hire
Pay Rate: $71,500-$107,300/salary DoE
Schedule:
Keywords: #QualityEngineer #EngineeringJobs
JOB RESPONSIBILITIES:
* Develops, implements, and follows up on root cause and corrective actions (RCCA) in response to product rejected in house and product rejected by customers and supplier rejections.
* Perform supplier audits as needed.
* Host customer and regulatory agencies audits. (Federal Aviation Administration, AS9100 registrar, etc.).
* Develops, implements, and follows up on RCCA for findings resulting from these audits.
* Performs Over Inspection as a Designated Supplier Quality Representative (DSQR) by performing dimensional inspections, reviewing documentation, reviewing test data and Material Review Board (MRB) dispositions; submitting data by method specified by customer (website, etc.), operating scanning equipment for 2D marking, et
* Reviews and interprets customer Quality Requirements to develop and implement systems as needed to ensure compliance.
* Manages First Article Inspection (FAI).
* Provides methods and tooling for inspection; obtains certifications from suppliers and writes FAI reports in accordance with AS9102.
* Maintaining the Supplier portal.
* Monitor Supplier performance metrics and take appropriate measures when metrics are not met.
* Point of contact for all Suppliers.
REQUIRED QUALIFICATIONS:
* 2-3+ years of relevant work experience
* Experience working with suppliers, reviewing data, auditing
* Practical knowledge of state-of-the-art inspection and quality engineering/assurance techniques, procedures, instruments, equipment, theories, principles and concepts and general business operations.
* Practical knowledge of Quality Assurance analysis tools (Six Sigma, FAI, PPAP, APQP, PFMEA, 8D, Fishbone).
* Knowledge of aerospace industry or similar industry products and legal and regulatory requirements related to field.
* Ability to effectively apply continuous improvement principles and techniques to quality and manufacturing functions.
* Ability to use standard business software applications and/or specialized data analysis tools.
* Ability to work on a variety of problems of moderate scope and complexity where detail analysis of the data is required.
* Ability to read, analyze, and interpret drawings, specifications. Ability to use standard manual inspection tools (surface plate & height gage; vernier calipers & micrometers; plug & thread gages, etc.).
* Ability to effectively communicate and present information to suppliers, team members, team leaders and top management; respond to significant inquiries or complaints from customers, regulatory agencies.
* Ability to interpret a broad variety of technical instructions in mathematical or diagram form that include several abstract and concrete variables.
* Ability to define problems, collect data, establish facts, and draw valid conclusions.
* Ability to use full discretion in selecting procedures and techniques to apply to work and determine priority and order of assignments.
* Ability to effectively demonstrate team member competencies and participate in goal-setting, performance feedback, and self-development activities.
PREFERRED QUALIFICATIONS:
* Associates Degree in Engineering Technology required. Bachelor of Science (4 year) degree in an Engineering major is preferred.
* Working knowledge of Geometric Dimensioning and Tolerancing (GD&T) and ASME Y14.5 preferred but not required.
* Experience developing, implementing and troubleshooting alternate inspection methods preferred but not required.
* Experience in developing and implementing Root Cause and Corrective Action (RCCA) preferred.
* Working knowledge of the ISO Quality Standard preferred.
* Demonstrated ability to use standard manual inspection tools (surface plate & height gage; vernier calipers & micrometers; plug gages; thread gages etc.) preferred.
* Experience as a Designated Supplier Quality Representative (DSQR) for one or more major aerospace contractors (General Electric, Pratt & Whitney, Lockheed, etc.) preferred.
* TTS will provide training and certification as required.
* Experience authorizing dispositions as a member of a Material Review Board preferred.
* Demonstrated experience writing First Article Inspection (FAI) reports preferred.
If you are interested in this role, please apply via the apply now link provided. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract, temporary, temp-to-hire, and direct assignments. We are the employer of choice for thousands worldwide. For more information, please visit our website at Belcan.com
EOE/F/M/Disability/Veterans
Confirm your E-mail: Send Email
All Jobs from Belcan